SuperCorrExpo 2028 · Budget & deadline sheet
October 8–12, 2028 · Venue not confirmed yet, Orlando, FL
October 8–12, 2028 · Venue not confirmed yet, Orlando, FL
Booth price tiers (all-in, 2026 ranges)
| Footprint | Rental with your graphics | Custom build |
|---|---|---|
| 10×20 inline | From $16,400 | $15,000 – $45,000 |
| 10×30 inline | From $19,550 | $25,000 – $65,000 |
| 20×20 island | From $17,200 | $50,000 – $120,000 |
| 20×40+ island | From $25,100 | $100,000 – $250,000 |
Rentals include design, structure, graphics, furniture, lighting, shipping both ways, installation and dismantle. A custom-built booth runs roughly $100 to $250 per square foot depending on finish level, before shipping and install. An all-in rental runs about $35 to $100 per square foot, with design, graphics, furniture, lighting, shipping both ways, install and dismantle included; booth space, drayage and show services are extra.
Billed by the show
- Exhibit space (paid to TAPPI and AICC)
- Material handling (drayage) at the venue, where the space rate does not include it
- Electrical, internet and rigging orders for SuperCorrExpo
- Booth cleaning, and union labor where the venue requires it
Published rates:
- Booth space: $32 per sq ft, 100 sq ft minimum; $1,000 deposit with the application (2024 contract)
- Outside corners: $100 per outside corner on 10x10 and 10x20 booths (2024 contract)
- Booth share fee: $500 per sharing company (2024 contract)
- Purple 10×20 rental: From $16,400 with design, graphics, furniture, lighting, shipping both ways and install
Key dates
- SuperCorrExpo 2028 opens: October 8, 2028
- Design sign-off with Purple: Summer 2028
- 2027: Apply for space through TAPPI's booth application; assignments follow application date, with priority for past exhibitors and TAPPI Sustaining Members.
- Early 2028: Machine selection, layout and setback drawings; booth design locked.
- Summer 2028: Service manual orders: power, air, rigging and forklifts; graphics in production at Purple's Orlando shop.
- Early October 2028: Target move-in: machines rigged, booth built and tested.
- October 8–12, 2028: SuperCorrExpo 2028, then teardown and outbound freight after the official close.
Purple planning timeline; confirm official dates against your exhibitor kit.
Checklist
- Machines to show, with footprints, weights and power and air needs
- Setback drawing: 3 ft from every aisle for working machinery
- Board, box and print samples for the display
- Booth share partner, if any, with TAPPI's share application
- Rigging and forklift needs for move-in
- Reuse plan for CorrExpo or TAPPICon
No fee left off: every SuperCorrExpo cost is listed upfront, on paper. Questions or a fixed proposal: (800) 994-8030 · info@purpleexhibits.com · purpleexhibits.com/shows/supercorrexpo/