Trade show booths in Reno
The Biggest Little City runs a big-league show floor. Purple is the booth builder and exhibit rental partner with a local Reno shop and crew: our designers draw your exhibit, our shops build it, and our installers roll it through the drive-in doors of the Reno-Sparks Convention Center or into a Peppermill ballroom, all for one all-in price that starts with a free 3D design.

Reno models & booth staff$85/hr · no travel fees →
Reno booths, the short version
Purple Exhibits is a booth builder and exhibit house for Reno shows, with a local Reno shop and crew that design, fabricate, ship and install custom exhibits, exhibit rentals and trade show displays. A 10×20 rental for a Reno show is $16,400 all-in and a 20×20 is $17,200, and that covers design, graphics, furniture, lighting, flooring, freight both ways plus install and dismantle labor; drayage, power, internet and parking are charged by the show or venue. The Reno-Sparks Convention Center offers 382,303 sq ft on one level in five halls with 34 ft ceilings, and several big Reno conferences meet at the Peppermill Resort instead. Nevada is right-to-work, so your show kit, not the state, decides who may build.
Brands that have exhibited in Purple-built booths













Why Reno exhibitors put Purple on the floor plan
Reno is not a smaller Las Vegas. The convention center sits two miles from the airport on one floor with drive-in doors on every hall, the busiest season lands in snow months, and a lot of the conference action happens in resort ballrooms down South Virginia Street. We plan for each of those, then hand you one figure.
Reno crew, Fishkill backbone
Purple keeps a shop and installers in Reno, with our main shop in Fishkill, NY behind them. A single Purple project manager owns your booth from the first sketch to the outbound truck.
Right-to-work, kit-first
Nevada has been right-to-work since 1952, but some Reno kits still assign parts of exhibit handling to union labor. We read yours and staff the build to match, with install and dismantle already in the price.
Las Vegas-level pricing in Reno
Our Reno sizes carry the same all-in prices as our Las Vegas booths: design, frame, graphics, furniture, lighting, flooring, freight and labor together.
Your concept before you commit
A 3D design drawn to your hall and booth number, free, with one round of edits and a fixed price beside it.
We use the drive-in doors
Eight of the 19 freight doors are drive-in and every hall has one. We book your door through the show contractor so big pieces roll straight to the booth.
Ready for the next Sierra show
Between events your exhibit sits in storage, then gets rebuilt and checked in the shop before it heads back over the mountains.
What a Reno booth costs, with the labor in
Each footprint has one Reno figure with installation and dismantling folded in, crewed to the rules your show kit sets. Nevada is right-to-work, so the kit, not the state, decides who builds; the show's own services are the only line items left.
10×20See 10×20 designs →
10×30See 10×30 designs →
20×20See 20×20 designs →
20×40See 20×40 designs →
30×30See 30×30 designs →
40×40See 40×40 designs →
Included in the price
- Concept design with a revision pass, no charge
- Booth frame and every graphic panel
- The furniture, lights, monitors and flooring you approved
- Trucking into Reno and back out again
- Installation and teardown on site
- Order forms handled and a named Purple PM
What Reno shows invoice themselves
- Drayage from the door to your booth, by the show contractor
- Electrical and rigging, through the channels your kit names
- Internet from the convention center's own IT department
- Parking, $10 a day per car and cashless
In Reno the show contractor and the convention center's IT desk bill these, based on your freight weight, power order and connection.
Going bigger? A 60×60 for a Reno show starts at $63,800 all-in, and anything larger is quoted from its design. See all Reno designs priced for this city or run the cost calculator.
A Reno 10×20, every line on the table
Say you take a 10×20 at APSCON 2027 (July 19–23) in the Reno-Sparks Convention Center. Here is our all-in booth beside what the show and the building invoice on their own, so the total holds no surprises.
Every booth line item explained: how much a trade show booth costs.
| Item | Amount | Paid to |
|---|---|---|
| Purple all-in booth rentalDesign, booth, graphics, furniture, lights, floor, freight in and out, install, teardown and a Purple PM | $16,400 | Purple |
| Floor spaceYour 200 sq ft, billed at the APSCON contract rate | Per show contract | Show organizer |
| Drayage (material handling)Around 1,000 lb crated at our $115 per cwt Reno planning figure, 200 lb minimum | ≈ $1,150 | Show contractor |
| InternetA shared 10 Mbps wired line from the RSCC, per day, pre-ordered ($350 at the standard price) | $245 / day | Convention center |
| Booth and drayage | ≈ $17,550 before space, power and internet | |
Floor space follows your APSCON contract; no Reno show on our pages publishes a 2027 space rate yet. Drayage is our Reno planning figure; your contractor's kit has the exact rate. The freight weight is a sample figure, not a quote for Reno-Sparks Convention Center.
Reno booth prices by size
| Size | Square feet | Our all-in price |
|---|---|---|
| 10×20 inline | 200 sq ft | $16,400 |
| 10×30 inline | 300 sq ft | $19,550 |
| 20×20 island | 400 sq ft | $17,200 |
| 20×40 island | 800 sq ft | $25,100 |
| 30×30 island | 900 sq ft | $37,850 |
| 40×40 island | 1,600 sq ft | $41,600 |
| 60×60 | 3,600 sq ft | $63,800 |
Space is billed by your show, not by us; Reno organizers each publish their own price. At Reno-Sparks Convention Center our column is the complete booth: design, graphics, furniture, lights, freight both ways, setup and teardown, while the show bills drayage, power and internet.
Rental booths, priced for a Reno floor
Six designs from our rental range, each with its all-in price. Choose one and we put your brand on it; a rendering follows within 24 hours.
PX-05220×20 islandLit Tower and Meeting Nook$37,850 all-in · 9 itemsSee this design →
PX-67020×20 islandSquare Hanging Ring Sign and Backlit Graphic Wall$41,750 all-in · 12 itemsSee this design →
PX-62720×40 islandGiant Hanging Frame and Glass Meeting Rooms$60,850 all-in · 10 itemsSee this design →
PX-07120×30 islandHanging Sign and Product Panels$35,950 all-in · 11 itemsSee this design →
PX-63930×30 islandOverhead Canopy and Backlit Graphic Tower$63,350 all-in · 10 itemsSee this design →
PX-64040×40 islandOverhead Header Frame and Square Hanging Sign$61,600 all-in · 14 itemsSee this design →Exhibiting at the Reno-Sparks Convention Center
Everything here sits on one level: five halls chained from the north end by the Atlantis sky bridge to the south end toward Kietzke Lane, all with 34 ft ceilings and drive-in access. Nevada is right-to-work, yet the show kit still rules the build. These are the points our Reno crew checks first.
| Exhibit space | 382,303 sq ft · Halls 1–5, ground level |
|---|---|
| Largest hall | Hall 2 · 120,957 sq ft |
| Ceilings | 34 ft in every exhibit hall |
| Freight | 19 doors · 8 drive-in · main door 39 × 32 ft |
| Labor | Right-to-work · your kit sets the rules |
| Drayage, planning rate | about $115 per cwt of crated freight |
Hall-by-hall table, freight doors, published costs and a drayage estimator: Reno-Sparks Convention Center exhibitor guide.

Ask north or south first
Halls 1 and 2 sit by the Atlantis sky bridge; Halls 4 and 5 are at the far south end. Your hall decides your door and your walk.
Roll big pieces in
Every hall has drive-in access, so machines and vehicles can drive to the booth. Book the door through the show contractor.
Flooring is on the list
A recent kit warned the halls are not carpeted. Our all-in Reno price includes the flooring in your design.
Pad winter truck schedules
Most of the 2027 calendar here lands in January and February, when snow can close the I-80 passes. Aim for the advance warehouse.
Go cashless
Parking at $10 a day and the concession stands take cards and phone wallets only.
Book the Atlantis early
It is the only hotel on the sky bridge, and big shows sell it out: the Sheep Show's February 2027 block was gone by November 2026.
Northern Nevada faces for your booth
Booth reps, demo hosts, brand ambassadors and models for Reno floors, from the long halls on South Virginia Street to the resort ballrooms up the road. Think aircraft beside a drone pavilion, a golden retriever at a vet show, or a school-bus fleet manager who wants straight answers.
Book three to four weeks ahead for Reno, and earlier when a big resort conference fills the Peppermill. We staff with local people across the U.S., so a Reno booking never carries a travel fee. Our staffing page: roles, dress codes and how booking works →
Reno for exhibitors: river town, mountain freight, resort floors
Reno lives between the Truckee River and the Sierra, and its shows split between one big convention center and a row of resort ballrooms. Here is who exhibits, where to stay, when the city fills up and the mistakes that cost teams money.




Who exhibits in Reno
STN EXPO West brings school transportation to the Peppermill in July, with 1,000+ pros expected at its 2026 trade show in a 62,000 sq ft ballroom.
APSCON brings crewed and drone aviation into one shared exhibit floor, Halls 1–2 of the Reno-Sparks Convention Center, in July 2027, with about 150 exhibitors expected.
Nevada is geothermal country, and the Geothermal Rising Conference expects 1,500+ attendees at the Peppermill in October 2027.
Wild West Vet draws 1,100+ veterinary professionals, with 116 companies on its 2026 exhibitor list.
IEEE ESW counted 719 attendees and 34 technical papers in 2026, and meets in Reno in March 2027.
Neighborhoods for a Reno crew
The convention center, the Atlantis and the Peppermill all sit on this stretch; the closest base for any show.
Casino towers, the Arch and restaurants along the Truckee River, a short drive north.
Between downtown and the convention center: murals, coffee and small restaurants for a team dinner.
Reno's neighbor to the east, with its own hotels and Victorian Square.
Hotels near Reno-Tahoe International suit crews flying in for one long move-in day.
Reno timing the locals know
- January – February
The convention center's busiest stretch, with outdoor, conservation and engineering expos. Snow on I-80 can stall trucks, so ship to the warehouse early.
- March – July
IEEE ESW in March, then STN EXPO West and APSCON in July: Peppermill blocks go fast.
- August
Hot August Nights brings classic cars and big crowds to town; book rooms early for any late-summer date.
- October
Wild West Vet and Geothermal Rising share the fall, both at the Peppermill. Crisp days, cold nights.
Five Reno slip-ups, and the fix for each
- Reading right-to-work as no union labor. The 2025 Sheep Show kit still required union labor for parts of exhibit handling. Read your kit.
- Forgetting flooring. That same kit warned the halls are not carpeted. Our all-in price includes the flooring in your design.
- Bringing cash for parking. The $10 lots and the concessions are cashless; tell the crew before day one.
- Ordering internet on site. A shared 10 Mbps line is $245 a day pre-ordered but $350 at the standard price.
- Shipping late in a snowy week. Freight that misses the advance warehouse deadline pays a surcharge, and winter passes can close. Give it slack.
Sky bridges, Basque dinners and Tahoe light
What your booth team should know about a Reno show week: the connected hotel, the short airport hop and the food worth leaving the casino for.
Where to stay
- Atlantis Casino Resort Spa
- The only hotel joined to the convention center, by a sky bridge at the north end; the venue counts 818 connected rooms.
- Peppermill Resort Spa Casino
- About a mile up South Virginia Street and host of several Reno conferences; some shows run shuttles from here.
- Within five blocks
- The convention center counts 1,623 rooms within five blocks and more than 15,000 across Reno.
- Downtown on the river
- Casino towers and newer hotels near the Truckee River, a short drive north of the halls.
Getting around
- Airport
- Reno-Tahoe International is about 2.1 miles from the convention center, around ten minutes by car, with free shuttles to many hotels.
- Sky bridge
- Walk from the Atlantis to the north end of the building without going outside.
- Parking
- On-site lots cost $10 a day and take card, Apple Pay or Google Pay only; there is no cash at the gate.
- Mountain passes
- Freight from California crosses the Sierra on I-80, where winter storms can slow trucks; plan a buffer day.
What to eat in Reno
- Basque dinners
- Family-style Basque meals, a Northern Nevada tradition brought by sheepherders, served at long shared tables.
- Picon punch
- The Basque aperitif every local bartender knows, best after teardown.
- Casino steakhouses
- The resort towers along South Virginia Street hold steakhouses suited to a client dinner.
- Midtown
- Reno's Midtown district is lined with cafes, taprooms and small restaurants for a relaxed team night.
- Riverwalk
- Restaurants along the Truckee River downtown, with patios when the weather allows.
- Early breakfast
- Casino cafes open early, handy for a dawn move-in shift.
After the show
- Lake Tahoe
- The alpine lake sits up the mountain from Reno, an easy scenic drive for an afternoon off.
- Truckee River Whitewater Park
- Downtown river rapids where kayakers play in summer, steps from the Arch.
- National Automobile Museum
- A long-running Reno museum packed with classic cars, a good fit for any gearhead client.
- Weather
- Reno sits at about 4,500 ft in the high desert: dry air, sunny days, cold nights and snow possible from late fall into spring.



Reno venue guides
The Reno-Sparks Convention Center, our Nevada guides and the full venue library. Each guide covers halls, doors and what you can bring in.
| Building | Exhibit space | Ceiling | Labor rules | Drayage |
|---|---|---|---|---|
| Reno-Sparks Convention Center | 382,303 sq ft · Halls 1–5, ground level | 34 ft in every exhibit hall | Right-to-work · your kit sets the rules | about $115 per cwt of crated freight |
Reno-Sparks Convention Center figures are from our venue guide. The show kit always overrides them.


Everything for a Reno show, one team
Design, build, freight over the mountains, install, staffing and storage on a single proposal, with one project manager answering the phone.
Booths finished in our shops
Real exhibits from Purple crews, for pet, industrial, tech and consumer brands. Designed by our team, assembled for a check, crated and installed under Purple PMs.








Five stretches from put-in to take-out
From your first call to the crate heading home: five stretches, one project manager.
Put in: design & price
Tell us the event, the booth number and its dimensions. A 3D concept and an all-in Reno price come back inside two business days.
Read the river
You approve renders and artwork; we check the kit's labor and height rules and order power, internet and rigging on time.
Build & shop test
The booth is built, assembled in our shop, then crated for the advance warehouse with winter weather in the schedule.
Roll in & install
Freight comes through your hall's drive-in door, the contractor delivers it to the booth and your Purple PM runs the build.
Take out: dismantle & store
We pack it up, meet the carrier's pickup window and send it home or into storage for the next run.
Get your Reno booth price
Name the event and the footprint. A project manager replies within one business day, and the free 3D concept with a fixed Reno price arrives within two. No commitment.
- A free design drawn for your hall
- A single Reno figure with setup and teardown
- Reps and models priced alongside the booth
Prefer to talk? (800) 994-8030 · info@purpleexhibits.com
Reno booth questions, answered
What does a booth rental cost for a Reno show?
Reno prices are all-in: $16,400 for a 10×20, $19,550 for a 10×30, $17,200 for a 20×20, $25,100 for a 20×40, $37,850 for a 30×30 and $41,600 for a 40×40. Design, production, graphics, furniture, lighting, flooring, round-trip freight, install, dismantle and your project manager are inside the figure. Drayage, power, internet and parking come from the show or venue.
Is Purple a Reno exhibit house, a booth builder, or both?
Both. Purple designs custom exhibits and rents trade show displays as an exhibit house, and builds, ships and installs them as a booth builder, with a local Reno shop and crew backed by our main shop in Fishkill, NY.
Is labor union at the Reno-Sparks Convention Center?
Nevada has been right-to-work since 1952, so nobody must join a union to work your booth. Your show's general contractor and kit still decide what your staff may build; the 2025 Sheep Show kit, for example, said union labor would handle certain parts of exhibit handling. Purple plans the build to your kit and keeps install and dismantle in the Reno price.
Can trucks drive into the halls in Reno?
Yes. Eight of the convention center's 19 freight doors are drive-in, every exhibit hall has drive-in access, and the main door is 39 ft wide by 32 ft high, big enough for vehicles and aircraft. Your show contractor assigns the door.
How tall can a booth be at the Reno-Sparks Convention Center?
All five halls have 34 ft ceilings. Your show sets its own height limit, and the venue asks you to confirm rigging heights with its sales manager.
Which hotel connects to the Reno-Sparks Convention Center?
Only the Atlantis Casino Resort Spa, by a sky bridge at the north end of the building, near Halls 1 and 2. The venue counts 818 connected rooms and 1,623 within five blocks; big shows sell the Atlantis out early.
Why do so many Reno shows meet at the Peppermill?
Several of Reno's 2027 conferences, including IEEE ESW, STN EXPO West, Wild West Vet and the Geothermal Rising Conference, book the Peppermill Resort. STN lists its Tuscany Ballroom at 62,000 sq ft with a 32 ft ceiling. Purple builds for resort ballrooms as readily as convention halls.
How much should we budget for drayage in Reno?
Plan around $115 per hundredweight for crated freight, with a 200 lb minimum. Neither the venue nor a current show kit publishes the rate, so your kit has the real tariff. The Reno-Sparks Convention Center guide has a drayage estimator.
What does a 10×20 really cost at APSCON in Reno?
About $17,550 before floor space, power and internet: $16,400 for the Purple all-in rental and about $1,150 of drayage on 1,000 lb of crated freight at our $115 per cwt planning figure. Space is in your APSCON contract. Try the booth cost calculator for your own numbers.
How much is internet at the Reno-Sparks Convention Center?
The convention center's IT form lists basic Wi-Fi free, a shared 10 Mbps wired line at $245 a day pre-ordered or $350 at the standard price, and a shared 100 Mbps line at $1,085 or $1,550. Pre-order prices need payment 14 days before move-in.
Does winter weather affect Reno shows?
It can. Most of the convention center's 2027 calendar falls in January and February, and snow on the I-80 and US-395 passes can hold trucks. We ship to the advance warehouse early and watch the forecast in the last days before move-in.
Is parking cash or card at the Reno convention center?
Card only. Parking is $10 per car per day and the lots and concession stands are cashless: card, Apple Pay or Google Pay.
Which Reno shows draw the most exhibitors?
IEEE ESW, STN EXPO West, APSCON, Wild West Vet and the Geothermal Rising Conference are on the 2027 calendar, plus winter expos at the convention center. Browse every Reno show.
Is there a Purple shop right in Reno?
Yes. Purple runs a Reno shop and crew, supported by our main shop in Fishkill, New York, and the same project manager stays with your booth through move-in and move-out.
Can Purple provide booth staff in Reno?
Yes. Purple booth staff covers reps, demo hosts, brand ambassadors, hostesses and models at a flat $85 an hour for each person, with a four-hour minimum and no travel fees in Reno or any other U.S. city.
Is the free design real for a Reno show?
It is. You get a 3D concept for your exact space, with one round of edits, at no cost and without signing anything. Request your Reno design.
Rent or buy for Reno shows?
If Reno is one or two stops a year, or your sizes change, renting usually wins. If you exhibit often at one footprint, owning pays off. We build both, and owned booths stay in our storage between shows.
How big is the Reno-Sparks Convention Center?
It has 382,303 sq ft of exhibit space on one ground level in five halls, from 49,209 sq ft (Hall 5) to 120,957 sq ft (Hall 2, about 643 standard booths), plus a 29,716 sq ft ballroom with a 25 ft ceiling and 53 meeting rooms. The whole building measures 600,901 sq ft.
Has the Reno-Sparks Convention Center been updated recently?
Yes. PCMA reported a $10 million refresh in 2019 that added Wi-Fi for up to 25,000 devices, LED lighting, more daylight in the halls, new carpet, restrooms and kitchens. In 2026 the RSCVA advanced a plan for up to $25 million in bonds for further improvements; the project list was not public when we checked.
How early should we start on a Reno booth?
As soon as your space is confirmed, and earlier for a winter date. The free design comes first, then a 30 to 45-day build, with the contractor's warehouse and order deadlines running alongside.

Showing in Reno? Your free design is a click away.
Biggest Little City, biggest booth on the aisle. Send the show and the size, and in two business days you get a 3D concept, a fixed all-in Reno price and a timeline to move-in.
Photos: Skyline and city photos: Adobe Stock · "Reno-Sparks Convention Center" by Ken Lund, CC BY-SA 2.0 · "Reno Arch, Reno, Nevada" by Ken Lund, CC BY-SA 2.0 · "Reno - Skyline" by Reno Tahoe Territory, CC BY 2.0 · "DSC29088" and "DSC29092, Atlantis Casino Hotel, Reno, Nevada, USA" by jimg944, CC BY 2.0 · "Reno Skyline" by Trevor Bexon, CC BY 2.0. Booth photos: Purple Exhibits.







