Trade show booths in San Francisco
Built for a town that judges booths by the demo. Purple is the Bay Area booth builder and exhibit rental house with a local shop and crew, working Moscone's three buildings in SoMa, the Union Square hotel ballrooms and the San Jose and Santa Clara halls down in Silicon Valley. We design, fabricate and install under San Francisco's union rules for one all-in price, and the 3D concept is free.

San Francisco Bay Area models & booth staff$85/hr · Bay Area crew →
Bay Area booths: the short version
Purple Exhibits works as a booth builder and full-service exhibit house for the San Francisco Bay Area, with a local Bay Area shop and crew and our main shop in Fishkill, NY behind them, delivering custom exhibits, exhibit rentals and trade show displays. For a show at the Moscone Center, a 10×20 booth rental starts at $17,800 all-in and a 20×20 at $19,300, covering design, graphics, furniture, lighting, flooring, round-trip freight and the union install and dismantle labor San Francisco requires; drayage, electrical, internet and rigging are billed by the show. Moscone is three buildings with 502,440 sq ft of connected halls under ceilings up to 37 ft, and the same prices apply in San Jose and Santa Clara.
Tech, science and health brands we have built for












San Francisco booth pricing that ships complete
Each size has one Bay Area figure with San Francisco's union install and dismantle folded in, the same at Moscone, San Jose or Santa Clara. Only the venue's own services get billed on the side.
10×20See 10×20 designs →
10×30See 10×30 designs →
20×20See 20×20 designs →
20×40See 20×40 designs →
30×30See 30×30 designs →
40×40See 40×40 designs →
Included in the price
- Your 3D concept and one revision round, at no cost
- Frame, fabric walls and printed panels
- The furniture, lights, monitors and flooring from the concept
- Freight to the Bay and the trip home
- Union install and dismantle to San Francisco rules
- Labor orders, show forms and one Purple project manager
Charges the venue sends you
- Drayage inside Moscone or the South Bay halls
- Electrical service for the booth
- Internet from the venue's own tech team
- Rigging for signs or truss overhead
The show contractor and Moscone's internet team invoice these themselves, based on your crate weight and what you order for power and connectivity.
Need a bigger footprint? A 60×60 for a Bay Area show starts at $77,000 all-in; anything larger is priced from its design. Browse every San Francisco Bay Area rental design with prices or try the booth cost calculator.
Three buildings, one show: Moscone Center
Moscone North and South sit mostly underground beneath Yerba Buena Gardens and join into 502,440 sq ft of halls; Moscone West stands across 4th Street with its own docks. The floor is union, the internet is Moscone's alone and the big weeks close the streets. This is what our Bay crew checks first.
| Exhibit space | 790,000+ sq ft across North, South and West |
|---|---|
| Connected halls | 502,440 sq ft · Halls A–F |
| Ceilings | 37 ft Halls A–C · 28 ft Hall F · 24 ft Hall E |
| Docks | 20 North/South on 3rd St · 9 West, basement off Howard |
| Drayage plan | near $180 per hundredweight |
| Airport | SFO 25–40 min by car · Oakland as backup |
Building-by-building specs, labor rules, internet prices and FAQ: Moscone Center exhibitor guide.

Label the building
North and South trucks unload on 3rd Street; Moscone West uses its basement docks off Howard Street. Put building and hall on every label and carrier order.
Measure the trailer
North and South docks take trucks up to 13 ft 6 in, West takes 14 ft. A high-cube that fits West can be turned away on 3rd Street.
Even a pop-up can need labor
A recent Moscone kit requires a labor order once a booth is bigger than 100 sq ft, taller than 10 ft, needs tools, two people or more than 30 minutes.
No private Wi-Fi
Moscone's own team is the only internet provider and exhibitor access points are banned. A wired Economy Plus line is $800 ordered ten business days ahead.
Check the arches in Hall C
Halls A–C list 37 ft, but Moscone marks low-ceiling areas and support arches in Hall C. Confirm clearance before ordering a hanging sign.
Beat the Dreamforce rush
When Dreamforce or RSAC takes all three buildings, hotels fill and streets close. Lock rooms early and plan crew arrivals by Muni or BART.
Downtown San JoseSilicon Valley's hall: San Jose McEnery Convention Center
Three halls of 143,000 sq ft under 32 ft ceilings, a light rail stop at the door and two hotels joined to the building. In 2027 it hosts NVIDIA GTC, DAC, Display Week and SPIE's lithography meeting, and its union rules draw the self-setup line at 30 minutes, no tools and 10 ft.
| Exhibit halls | 143,000 sq ft · Halls 1–3 · about 800 booths |
|---|---|
| Ceiling | 32 ft in Halls 1–3 |
| Labor | Union · 30-minute, no-tools, 10 ft rule |
| Connected hotels | San Jose Marriott (about 510 rooms) · Hilton San Jose (353) |
| Transit | Light rail stop at the front door |
| Airport | SJC about 4 miles |
Hall specs, union list and drayage estimator: San Jose McEnery Convention Center exhibitor guide.
Ten feet is the line
San Jose's published rules send anything over 10 ft in any direction to union install. A 10×20 backwall counts, so budget it.
Mind the garage height
The center's garage clears only 6 ft 8 in, too low for many work vans. Park crew vehicles elsewhere and ride light rail in.
Do not reuse a Santa Clara plan
Some shows move between Santa Clara and San Jose; unions, docks and rules differ, so start each plan fresh.

Why Bay Area exhibitors ship their booths with Purple
San Francisco hands exhibitors a puzzle: three Moscone buildings with different docks and ceilings, a union floor where even a pop-up can need a labor order, and conference weeks that close the streets of SoMa. Down the Peninsula, San Jose and Santa Clara each have their own rules. Our Bay crew solves all of it inside a single quote.
Bay Area shop, Bay Area crew
Purple keeps a local shop and crew around the Bay, supported by our main shop in Fishkill, NY. Your Purple project manager follows the booth from the 3rd Street docks to the last pallet out.
San Francisco union rules, already priced
California is not right-to-work and San Francisco union jurisdictions cover exhibit install and dismantle. That labor is part of every Bay Area price we send.
A single number, no surprises
Design, structure, graphics, furniture, lighting, flooring, freight both ways, install, dismantle and forms are rolled into one figure. Show services stay on the show's invoice.
Concept on the house, 48 hours later
Tell us the building, hall and booth number; a 3D concept fitted to that ceiling, with one revision round, arrives in two business days.
Right building, right dock
North and South unload on 3rd Street, West in its basement off Howard. We write the building and hall on every bill of lading and size the truck to the door.
Ready for the next Bay show
Between shows your booth sits in secure storage, then gets assembled and checked in the shop before Moscone, San Jose or Santa Clara.
Rental booths with Bay Area pricing
Six designs pulled from our rental line, each showing its Northern California price. Pick one and our team re-skins it in your brand; you see the rendering within 24 hours.
PX-66920×20 islandFour Portal Arches and Raised Display Plinth$43,250 all-in · 8 itemsSee this design →
PX-56920×20 islandSquare Hanging Sign and Lit Feature Wall$43,200 all-in · 9 itemsSee this design →
PX-76920×40 islandLiving Wall Tower and Refrigerated Display Cases$66,950 all-in · 10 itemsSee this design →
PX-77820×30 islandHanging Plant Sign$52,100 all-in · 12 itemsSee this design →
PX-63930×30 islandOverhead Canopy and Backlit Graphic Tower$67,200 all-in · 10 itemsSee this design →
PX-61340×40 islandSquare Hanging Sign and Wood-Slat Meeting Rooms$69,950 all-in · 11 itemsSee this design →The real total for a 10×20 at Moscone
Picture a 10×20 at RSAC 2027 (April 5–8) in Moscone. Below is our all-in booth next to the charges the show and its contractors send separately, so the budget holds when the invoices arrive.
How every booth cost line works: how much a trade show booth costs.
| Item | Amount | Paid to |
|---|---|---|
| Purple all-in booth rentalDesign, structure, graphics, furniture, lights, flooring, freight both ways, union install and dismantle, and your project manager | $17,800 | Purple |
| Floor space200 sq ft at your show contract's rate | Per show contract | Show organizer |
| Drayage (material handling)About 1,000 lb of crated freight at our $180 per cwt Moscone planning figure | ≈ $1,800 | Show contractor |
| Electrical, internet, riggingPower from the show's provider and internet from Moscone's own team; we order before the advance deadline | Per show kit | Show contractor |
| Booth and drayage | ≈ $19,600 before floor space and utilities | |
Floor space follows your show contract; our cost pages list no published 2027 space rate for a Bay Area show. Drayage is our Moscone planning figure; the exact rate is in your show kit. The example weight is an illustration, not a quote for Moscone Center.
Every booth size, all-in, for a San Francisco Bay Area show
| Booth | Floor area | Purple all-in |
|---|---|---|
| 10×20 inline | 200 sq ft | $17,800 |
| 10×30 inline | 300 sq ft | $21,300 |
| 20×20 island | 400 sq ft | $19,300 |
| 20×40 island | 800 sq ft | $27,900 |
| 30×30 island | 900 sq ft | $41,700 |
| 40×40 island | 1,600 sq ft | $46,450 |
| 60×60 | 3,600 sq ft | $77,000 |
Every show sells its own floor space, so ask your San Francisco Bay Area organizer for the rate. The Purple price includes design, build, graphics, flooring, lighting, shipping both ways, install and dismantle at Moscone Center; drayage, power and internet are billed by the show.
The Bay Area for exhibitors, minus the guesswork
Shows here split between Moscone in San Francisco and the South Bay halls in San Jose and Santa Clara, with Union Square ballrooms catching the investor meetings. Below: the industries that come, the neighborhoods to sleep in, the weeks to avoid and the slips we see most.




Who exhibits around the Bay
RSAC brought 44,000 attendees and 600+ exhibitors to Moscone in 2026; it returns in April 2027.
SPIE Photonics West expects 24,000 people and 1,400+ exhibitors across all three Moscone buildings in 2027.
NVIDIA GTC listed 435 sponsors and exhibitors across downtown San Jose in 2026, and Data + AI Summit books all of Moscone for 2027.
DAC counted 5,059 registrations in 2026 and moves to San Jose in July 2027, joining Display Week and Chiplet Summit in the South Bay.
Heart Rhythm drew 10,573 attendees in 2026, and JPM week fills the Union Square hotels each January.
Winter FancyFaire drew 12,000+ industry professionals in 2026 and opens Moscone's year in January 2027.
Where to base the crew
Right on top of Moscone, with the Marriott Marquis across the gardens; first to fill during the big tech weeks.
The big hotel towers ten minutes north on foot, plus the ballrooms that host JPM week.
Waterfront dinners near the Ferry Building, and BART at Montgomery for the ride in.
Classic client-dinner territory, a short ride from the hotels.
Two hotels joined to the center and light rail at the door; walkable for GTC and DAC.
The hall sits next to Levi's Stadium and California's Great America, so check game days.
Bay Area timing that saves money
- January
JPM week packs Union Square, Winter FancyFaire opens Moscone and Photonics West closes the month. Book rooms in the fall.
- March – April
NVIDIA GTC takes downtown San Jose, then RSAC fills Moscone. Order labor and internet at the advance rates.
- June
Snowflake Summit and Data + AI Summit stack up at Moscone while Display Week and Sensors Converge run in the South Bay.
- September
Dreamforce closes streets around Moscone. Plan freight windows and have crews ride transit.
Bay Area slip-ups we help prevent
- Leaving the building off the bill of lading. Moscone North, South and West use different docks; label every crate.
- Sending a high-cube to 3rd Street. North and South docks clear 13 ft 6 in; West takes 14 ft.
- Packing your own Wi-Fi router. Moscone bans exhibitor access points; order a wired line early.
- Assuming a pop-up is self-install. Over 100 sq ft, 10 ft, tools, two people or 30 minutes means a labor order.
- Parking a van in the San Jose garage. Clearance is 6 ft 8 in; plan parking elsewhere.
San Francisco booth staff who can demo
A Bay Area roster built for the second question: demo hosts, lead qualifiers, brand ambassadors and models who get a product briefing before day one, so they can talk through your software and hand qualified buyers to your engineers. They ride BART and Muni in, which matters when Dreamforce closes the streets.
Book about six weeks out for Dreamforce and RSAC and three weeks for most other shows. Our crew lives in the city, the East Bay and down the Peninsula, so there are no travel fees, and they dress in layers for the fog. San Francisco staffing page: lookbook, dress codes and the Dreamforce budget →
SoMa towers, sourdough and the Golden Gate
What the booth crew should know: where to sleep near Moscone or in San Jose, how to beat the traffic and where to eat after close.
Where to stay
- San Francisco Marriott Marquis
- The closest large tower, on 4th Street a short walk from Moscone West, and a show venue in its own right.
- Hilton San Francisco Union Square
- One of the big Union Square towers, in walking distance of all three Moscone buildings.
- Union Square & SoMa hotels
- A wide range of price points 10 to 15 minutes on foot, close to BART and Muni.
- San Jose Marriott & Hilton San Jose
- Both joined directly to the San Jose convention center, for GTC, DAC and Display Week.
Getting around
- Muni Central Subway
- The Yerba Buena/Moscone station sits at the center's doorstep.
- BART
- Powell Street and Montgomery Street are a five to eight-minute walk; Caltrain's 4th & King is about twelve.
- Airports
- SFO is 25 to 40 minutes by car; Oakland works too, and SJC is about 4 miles from the San Jose center.
- South Bay
- Light rail stops at the San Jose center's front door, and Santa Clara's hall sits beside Levi's Stadium.
What to eat in San Francisco Bay Area
- Sourdough
- San Francisco's tangy bread, best in a bread bowl of clam chowder near the wharf.
- Mission burrito
- The foil-wrapped giant born in the Mission District, a cheap and filling crew lunch.
- Dim sum in Chinatown
- The oldest Chinatown in North America, a few blocks from Union Square.
- Ferry Building
- The Embarcadero landmark turned food hall, made for a team breakfast by the water.
- Cioppino
- The fishermen's seafood stew that San Francisco claims as its own.
- North Beach
- Italian dinners and espresso bars for a client night after the hall closes.
After the show
- Cable cars
- The moving landmark, ringing up the hills from Powell and Market.
- Golden Gate Bridge
- Walk or bike it from the Presidio side for the classic view.
- Alcatraz & the Embarcadero
- Ferries leave from the waterfront, an easy hop from the hotels.
- Weather
- Expect the 60s and fog most of the year; pack layers even in July.



From Moscone to the Silicon Valley halls
The three Moscone buildings, the San Jose and Santa Clara convention centers and the SoMa and Union Square hotel ballrooms. Each guide covers docks, ceilings, labor and exclusive services.
| Venue | Exhibit space | Ceiling | Loading | Labor rules | Drayage |
|---|---|---|---|---|---|
| Moscone Center | 790,000+ sq ft across North, South and West | 37 ft Halls A–C · 28 ft Hall F · 24 ft Hall E | 20 North/South on 3rd St · 9 West, basement off Howard | — | near $180 per hundredweight |
| San Jose McEnery Convention Center | 143,000 sq ft · Halls 1–3 · about 800 booths | 32 ft in Halls 1–3 | — | Union · 30-minute, no-tools, 10 ft rule | — |
Numbers for Moscone Center and San Jose McEnery Convention Center come from our exhibitor guide; your show kit has the final word.
Exhibiting near San Francisco Bay Area?
One Bay Area team, from first commit to teardown
Design, fabrication, freight to the right Moscone door, union install, staff and storage, all in one proposal with one project manager.
Five commits from brief to merged
Brief, sign-off, build, union install and storage, with one Purple project manager on every step.
Free concept & price
Share the show, the building and the footprint. Within two business days a 3D concept and an all-in Bay Area figure come back.
You sign off
Approve renders and artwork while we file labor orders, internet with Moscone and the EAC paperwork.
Build and test-fit
We fabricate, set the booth up in the shop to check every joint, then crate it labeled for its building and dock.
Union install, Purple lead
Union crews build under your Purple project manager, so your team arrives to a finished, lit, demo-ready booth.
Teardown & storage
We strike the booth, return empties and send it home or into storage for your next Bay Area show.
Exhibits we have shipped
Finished booths for technology, medical, industrial and consumer exhibitors. Every one designed by our team, test-assembled and installed under Purple project managers.








Get your San Francisco booth price
Tell us the show, building and booth size. A Purple project manager replies within one business day, and the free 3D concept and fixed Bay Area price follow within two, no obligation.
- A free design sized to your Moscone hall
- One all-in Bay Area price, union I&D included
- Demo hosts or lead qualifiers on the same quote
Prefer to talk? (800) 994-8030 · info@purpleexhibits.com
San Francisco booth questions, answered
What is the price of a trade show booth in San Francisco?
Bay Area rentals from Purple come as one all-in number: $17,800 for a 10×20, $21,300 for a 10×30, $19,300 for a 20×20, $27,900 for a 20×40, $41,700 for a 30×30 and $46,450 for a 40×40. Design, build, graphics, furniture, lighting, freight both ways, union install and dismantle, forms and a project manager are inside. The show bills drayage, power, internet and rigging, and owned custom booths are quoted from the design.
Do San Jose and Santa Clara shows cost the same?
Yes. The Bay Area table covers Moscone, the San Jose McEnery Convention Center, the Santa Clara Convention Center and the hotel ballrooms around them. Only the show's own lines, such as floor space and drayage, change between venues.
Booth builder or exhibit house: what is Purple in the Bay Area?
Both. We design custom exhibits and rent trade show displays as an exhibit house, and we fabricate, ship and install them as a booth builder at Moscone and in Silicon Valley. One Bay Area project manager runs it from first sketch to final crate.
Which Moscone building is my show in?
Check the floor plan. Halls A–D are in Moscone South and E–F in Moscone North, joined into 502,440 sq ft; Moscone West stands across 4th Street with its own basement docks. Some shows, like Photonics West and Data + AI Summit, use all three.
Is the Moscone Center union?
Yes. California is not a right-to-work state, and San Francisco union jurisdictions cover installing and dismantling exhibits. Unpacking and placing your products is not covered. Our Bay Area prices already include the install and dismantle labor.
Can our team set up its own booth at Moscone?
Only a very simple one. One recent kit requires a labor order if the booth is bigger than 100 sq ft, taller than 10 ft, needs hand tools, two people or more than 30 minutes. The Moscone exhibitor guide has the details.
How high can we build at Moscone?
Halls A–C list 37 ft, Hall F 28 ft and Hall E 24 ft. Moscone marks support arches and low-ceiling areas in Hall C on its floor plans, so check your booth location before ordering tall walls or a hanging sign.
Can we bring our own Wi-Fi to Moscone?
No. Moscone's own team is the exclusive internet provider and exhibitor access points are prohibited. An Economy Plus wired line was $800 ordered ten business days ahead and $900 after; dedicated lines cost more.
What does a 10×20 at RSAC really cost?
About $19,600 before floor space and utilities: $17,800 for our all-in rental and around $1,800 of drayage on 1,000 lb at our $180 per cwt Moscone planning figure. Floor space comes from your RSAC contract, and the booth cost calculator fills in the rest.
How does Dreamforce week affect other shows?
When Dreamforce takes all three Moscone buildings, hotels fill and the streets around the center close. If your show is nearby on the calendar, reserve rooms early and plan crew arrivals by BART and Muni.
What are the labor rules in San Jose?
San Jose's published rules require union labor if a job needs hand tools, more than one person, more than 30 minutes, or is over 10 ft in any direction. Teamsters Local 287 move freight and Sign & Display Local 510 install booths.
Where should we stay for a Moscone show?
The San Francisco Marriott Marquis on 4th Street is the closest large hotel, and the Union Square towers, including the Hilton, are about ten minutes on foot. Muni's Yerba Buena/Moscone station is at the door.
Is there a local Purple shop for Bay Area shows?
Yes. Purple has a local Bay Area shop and crew, backed by our main shop in Fishkill, New York, and your Purple project manager is on site at Moscone, San Jose or Santa Clara from move-in to teardown.
Which Bay Area trade shows are biggest?
RSAC, SPIE Photonics West, Dreamforce, the AAD Annual Meeting, OCP Global Summit, Winter FancyFaire, Heart Rhythm, NVIDIA GTC, SaaStr AI Annual, TCT, Display Week and DAC lead our list. See every Bay Area show.
Which shows are moving into or out of Moscone?
The OCP Global Summit moves from San Jose to Moscone starting October 4–7, 2027, while SEMICON West has made Phoenix its long-term home. Oracle's flagship conference also met in Las Vegas in 2026.
Can Purple provide booth staff in San Francisco?
Yes. Our San Francisco booth staff include demo hosts, lead qualifiers, brand ambassadors, models, suite hosts and multilingual staff, briefed on your product before day one. Whatever the role, it is $85 per staffer per hour with a four-hour floor and zero travel charges.
What do Bay Area trade show models cost?
A flat $85 per hour, per person, any role, with a four-hour minimum. The crew lives in the city, the East Bay and the Peninsula, so there is nothing to add for flights or hotels, and rush requests can be filled in 72 hours.
How far ahead should we plan a Moscone booth?
Start when space is confirmed: two business days for the free design, 30 to 45 days to build, and labor and internet orders before the advance deadlines. For Dreamforce and RSAC, book staff about six weeks ahead.
Rent or buy for Bay Area shows?
Rent when you exhibit once or twice a year or change sizes between Moscone and San Jose; buy when the same booth goes to many shows. We do both and store owned booths between Bay Area dates.

Exhibiting at Moscone or in the South Bay? Start with a free design.
Ship it, Bay style. Send the show and size; two business days later you have a 3D concept, a fixed all-in Bay Area price and a move-in plan for the right building.
Photos: Skyline and city photos: Adobe Stock · Cable car and Golden Gate Bridge by Carol M. Highsmith, Library of Congress (public domain) · "Yerba Buena Gardens - San Francisco" by Franco Folini, CC BY-SA 2.0 · "Plaza de Cesar Chavez fountain with Tech Museum in background" by donjd2, CC BY 2.0 · "Union Square" by bryce_edwards, CC BY 2.0 · "San Francisco / view of Marriott Marquis" by Robert Nyman, CC BY 2.0. Booth photos: Purple Exhibits.














