SAMPE 2027 2027 · May 17–20, 2027 · Salt Palace Convention Center, Salt Lake City
SAMPE 2027 booth design & build in Salt Lake City
Custom and rental exhibits for material suppliers, composite part makers, tooling and test companies, built so an engineer can pick up the specimen and see the finished part beside it. Engineered supports for heavy components, honest lighting for subtle surfaces, and Salt Palace freight and installation handled by Purple.
Female researcher working among instruments in a laboratory
Purple at SAMPE 2027 2027
What makes SAMPE 2027 different, and how we build for it
SAMPE is the North American meeting for advanced materials and process engineering, and the floor is built around people who test, specify and manufacture composites. More than 100 Technical Presentations, the University Research Symposium, the Tutorials and the Student Bridge Competition pull engineers, researchers and program managers from aerospace, defense, automotive and energy into the same hall as the exhibitors, and the Awards Ceremony and SAMPE Corporate Partner Program keep the senior people on site. In 2026 the show drew 2,528 industry professionals and 183 exhibiting companies, and 74 percent of attendees influence purchasing decisions. A booth that puts a real specimen beside a real part, with a table for the technical conversation, is what this audience rewards.
Specimens they can handle, a cut section or finished part that shows the construction, and staff who can talk cure cycles, fiber architecture and test data without a script.
A comparison surface with labeled samples, a screen for process data or animations, and a quiet table to discuss evaluation samples and documentation.
One clear application story from the aisle, proof of manufacturing capability and a private meeting spot for program and supply conversations.
Purple in Salt Lake City
Local crew, national shop
Purple builds in Fishkill, NY and Las Vegas, NV, ships to every hall in the United States and installs on site with our own project manager and local labor. For Salt Lake City we book freight targets, coordinate the general contractor and run a pre-show QA so your team can just show up.
Predictable 30–45-day turnarounds, secure storage and pre-show QA. Your booth ships from our production shop in Fishkill, NY or our Las Vegas hub, and our project manager is on the floor for install and dismantle.
Booth options for SAMPE 2027 2027
Pick a footprint. We’ll price it as a rental, a custom build, or a hybrid.
SAMPE floors are mostly inline booths from material suppliers, tooling and test companies, with islands from the large composites and aerospace primes. A 10×10 or 10×20 with a specimen library and one anchor part is the normal footprint, and Purple clients at materials shows usually choose a 10×20 or a 20×20 island with a meeting table.
One anchor component on an engineered support, a lit specimen tray and a counter with drawers for the rest of the sample range.
See 10×10 rental booths →
A material library wall organized by product family, a finished part or cut section as the anchor, and a small table for technical conversations.
See 10×20 rental booths →
A process demonstration or equipment footprint, a specimen-to-structure sequence, a hanging sign and an open meeting area.
See 20×20 rental booths →
Several material or process stations around a shared engineering meeting room, large composite structures with rigging and a storage room for specimens and literature.
See 20×30 rental booths →All-in 2026 ranges for design, structure, graphics, installation and dismantle; booth space, drayage and show services are separate. A custom-built booth runs roughly $100 to $250 per square foot depending on finish level. A rental of the same footprint usually lands at 35 to 50 percent of the purchase price for one show. Get an exact number for SAMPE 2027 with the booth cost calculator or read the 2026 booth cost guide.
Send the show, your booth size and what the space needs to do. We return a fixed proposal, usually within two business days.
Built by Purple
Booths we have designed, built and installed
Case study · Shapoorji Pallonji
Shapoorji Pallonji at engineering and infrastructure exhibition
A structured, powerful booth for a global engineering group founded in 1865, built to communicate scale, trust and engineering excellence.
Read the Shapoorji Pallonji case study All case studies →“They handle everything end to end so clients can really just show up and not worry about anything. Doesn’t get any better than that.”
Tess Bockes, Exit King Realty · more client reviews
Designing for advanced materials, composites and process engineering at SAMPE 2027
Four things we get right for SAMPE 2027 exhibitors
Let the specimen be examined
Advanced materials are visually subtle, and a dramatic wall can swallow a small coupon. We give every specimen a lit close-view surface with a consistent label and connect it to a larger part or application visual, so the visitor understands why the small object deserves a closer look.
Support the part so its structure reads
We design fixtures that expose the relevant section, surface or joint instead of hiding it behind branding. Send us the real component's weight, handling points and transport protection and we engineer the support, the crate and the lift plan before drawing the surrounding architecture.
Pair the process with its output
Place an approved process sequence, tooling example or short animation within sight of the input and output specimens, and keep the system diagrams at a working table with your technical team. Visitors follow the stage you supply without you disclosing proprietary parameters.
Plan the handoff and the storage
Decide which items can be handled, which need a representative and which are display-only. We build storage for spare specimens, packaging and literature into the furniture so the comparison surface stays clear, and the tray and packing system carries over to your next show.
Concept rendering
Every proposal comes with a rendering like this
You see the booth in 3D before we cut a single panel: layout, graphics, lighting and product positions, revised until it is right. Shown: a Purple concept for KSE Suppliers.
Start my SAMPE 2027 conceptSalt Palace Convention Center · Salt Lake City
Logistics for SAMPE 2027 2027, handled
The Salt Palace Convention Center sits downtown at 90 South West Temple, with the exhibit halls, meeting rooms and service ordering all run by the venue itself. We install with our own project manager and the local crew we book for Salt Lake City. We read the SAMPE exhibitor kit, file every form, order electrical, internet and any compressed air a demonstration needs through Salt Palace Event Technology Services, book your freight target, ship to the advance warehouse and handle the drayage paperwork. We plan the booth against the published Salt Palace floor plan for your assigned space. Heavy components and specimen cases arrive crated, and we place and level every fixture before your engineers land.
What Purple handles
- SAMPE exhibitor kit, forms and deadlines
- Engineered supports and crating for heavy components
- Graphics printed in house and proofed against your samples
- Venue utility, internet and compressed air orders
- Freight to the advance warehouse and drayage paperwork
- Installation, dismantle and return shipping with our Salt Lake City crew
Timeline, counted back from move-in
- Early March 2027Design sign-off, structural check of component supports and island drawings submitted where required.
- March to mid-April 2027Production in Fishkill, NY or Las Vegas; graphics proofed against your real specimens and part photography.
- Late April 2027Booth, fixtures and crated components ship to the advance warehouse for Salt Lake City.
- May 15–17, 2027Targeted move-in at the Salt Palace; Purple's project manager and local crew install and run the pre-show checklist.
- May 17–20, 2027Show days; a Purple project manager is on call for the whole run.
- May 20–21, 2027Dismantle, specimens and components packed to your return plan, booth to storage or the next show.
SAMPE 2027 exhibitor questions
Questions exhibitors ask us before SAMPE 2027
How much does a SAMPE booth cost?
A complete 10×10 rental runs $3,500 to $8,000, a 10×20 rental $7,500 to $15,000, and a 20×20 custom island $50,000 to $120,000, including design, structure, graphics and installation. Custom part supports and specimen libraries move the number; send us sizes and weights and we return a fixed quote.
Can you install at the Salt Palace Convention Center?
Yes. We bring our own project manager and book the local Salt Lake City crew. We handle the freight target, the dock, the drayage and the utility orders through Salt Palace Event Technology Services, then place and level every fixture and component before your engineers arrive.
Can we rent a booth for SAMPE instead of buying one?
Yes. Rental structures with your graphics, a custom specimen wall on a rental frame, or a fully custom build are all available. Most first-time SAMPE exhibitors start with a 10×10 or 10×20 rental and add one engineered fixture for the anchor part.
When do we need to decide?
Design sign-off by early March gives a comfortable 30 to 45 day build and a late April ship date for the May 17 opening. Later is possible; the trade-off is finish options and freight cost on a tighter window.
Do you handle the exhibitor paperwork, drayage and utilities for SAMPE?
We file the organizer forms that concern the booth, order electrical, internet and compressed air through Salt Palace Event Technology Services, book your material handling and keep you copied on every deadline so nothing depends on a form you did not know about.
Get a proposal
Tell us about your SAMPE 2027 booth
What happens next
- We reply within one business day with questions about your products, goals and footprint.
- You get a concept rendering and a fixed proposal, usually within a week.
- We build in 30–45 days, ship to the advance warehouse and install before the hall opens.