
defense, C4ISR and cyber · 2027 location not confirmed yet
I/ITSEC 2027Exhibitor guide: booth costs, dates and deadlines
Simulators on the floor: I/ITSEC 2027 booths in Orlando
- Event dates
- 2027 dates not confirmed yet
- Exhibit hall
- Not confirmed yet
- Venue
- Not confirmed yetLast edition: Orlando, FL
Updated Add key dates to your calendar (.ics)
4.9 star client rating3,000+ exhibitorsIn business since 201510,000+ booths built


Quick answers
I/ITSEC 2027 in 30 seconds
I/ITSEC, the Interservice/Industry Training, Simulation and Education Conference, is the defense modeling, simulation and training show run by the National Training & Simulation Association, an NDIA affiliate. I/ITSEC 2026 runs November 30 to December 3, 2026, in the South Concourse of Orlando's Orange County Convention Center, per NTSA; the 2027 week and hall are not confirmed yet. In 2025, 502 companies filled 216,200 net square feet and 8,367 people visited the exhibits, per NTSA. Simulator, VR, synthetic environment and courseware makers buy space by the square foot or as fixed turnkey packages. Purple builds simulator platforms and trainer booths for it.
- When is I/ITSEC 2027?
- The 2027 dates and location are not confirmed yet. The last edition was in Orlando, FL.
- When is the I/ITSEC exhibit hall open?
- Not confirmed yet for 2027. In 2026 the exhibit hall in the OCCC South Concourse opened November 30 through December 3 (noon to 6 p.m. on the first day, 9:30 a.m. to 3 p.m. on the last).
- How big is I/ITSEC?
- not confirmed yet (2026 edition).
- What does booth space cost at I/ITSEC?
- $39.00 per sq ft inline or one corner; $40.00 per sq ft island or split island, paid to the organizer.
- How much is a 10×20 booth at I/ITSEC, all-in?
- $7,500 – $15,000 for a Purple rental in the host city: design, graphics, lighting, install and dismantle. Space and show services are billed separately by I/ITSEC.
Official I/ITSEC 2027 links: I/ITSEC 2027 floor planI/ITSEC 2027 exhibitor listI/ITSEC 2027 hotelsI/ITSEC 2027 booth space
Air, cyber & C4ISR · 2027 city not confirmed yet
216,200
net square feet of training and simulation exhibits at I/ITSEC 2025, per NTSA source
Everything about I/ITSEC 2027 in one place
I/ITSEC 2027 fact sheet
| Official name | I/ITSEC 2027 Interservice/Industry Training, Simulation and Education Conference |
|---|---|
| Event dates | 2027 dates not confirmed yet |
| Exhibit hall dates | Not confirmed yet In 2026 the exhibit hall in the OCCC South Concourse opened November 30 through December 3 (noon to 6 p.m. on the first day, 9:30 a.m. to 3 p.m. on the last) |
| Venue | Orlando, Florida Orlando, FL |
| Organizer | National Training & Simulation Association (NTSA), an affiliate of NDIA |
| Size (2026) | not confirmed yet source |
| Nearest airport | Orlando International Airport (MCO), about 12 miles from the Orange County Convention Center, the 2026 venue Distance per the OCCC. The 2026 show sits in the OCCC South Concourse, next to the Hyatt Regency Orlando and across from the Rosen Centre, per NTSA |
| Hotels | 2027 housing not confirmed yet; NTSA publishes the hotel program with each edition Official hotel page → |
| Official website | iitsec2026.smallworldlabs.com |
Official I/ITSEC resources
I/ITSEC 2027 calendar
I/ITSEC 2027 dates and deadlines
Published I/ITSEC dates in order, each one linked to the organizer page that states it. We highlight the next one.
01 Purple at I/ITSEC 2027
Simulators on the floor: I/ITSEC 2027 booths in Orlando
I/ITSEC is the defense modeling, simulation and training show: 502 companies filled 216,200 net square feet in 2025, per NTSA. We build booths that hold a cockpit, a VR station or a full trainer and still invite program officers in.
- 2027 dates not confirmed yet
- 502 exhibitors in 2025
- 216,200 net sq ft (2025)
What makes I/ITSEC different, and how we build for it
I/ITSEC is run by the National Training & Simulation Association, an NDIA affiliate, and it is where the services, program offices and allied militaries look at the tools that train their people: flight simulators, convoy trainers, distributed learning, immersive 3D environments and AI-driven training. The floor is large and physical. In 2025, 502 companies occupied 216,200 net square feet, and many booths carry full simulator cabs and motion bases, which is why NTSA schedules move-in by booth size over several days. Booth fees include Innovation Showcase presentations on the floor and an Exhibitor Networking Night hosted inside the booths.
Simulators, synthetic environments and courseware they can see working, with a clear path to a program or contract vehicle.
Training systems that allied forces can buy or share, from more than 2,000 international visitors in 2025.
Technical depth behind the demo: fidelity, data, interoperability and the papers and tutorials that run next to the hall.
Your team in Orlando
How Purple runs I/ITSEC in Orlando
Our shops in Las Vegas and Fishkill, NY split the work by your season: one fabricates the simulator platforms and enclosures, either prints the graphics. Freight follows The Expo Group shipping instructions for your size-based move-in slot, and the Purple project manager is on the floor from move-in to the last crate with the labor the show requires, coordinating the simulator vendor technicians.
Inside I/ITSEC 2027
Rules that shape your I/ITSEC booth
In 2026, 800 sq ft and larger booths could move in from November 25 with direct freight and a pre-approval form, 400 sq ft and up from November 27, the rest on the weekend. Big simulators need the early slot.
NTSA's turnkey booth packages cannot be altered from their original designs and included items cannot be substituted; extra items are direct-billed by The Expo Group.
Subletting or sharing a booth needs show management permission and carries a $1,500 fee for each additional company, with a compliance form from NTSA.
No one under 16 may enter during set-up or removal; ages 12 to 15 may visit during exhibit hours only with a chaperone, and under 12 are never admitted.
Programs worth planning for
Included with booth space: live presentations on the show floor in front of acquisition and mission leaders, per NTSA's 2026 exhibitor page.
Launched in 2026 for welding, pipefitting, electrical and additive manufacturing training: eight exhibitor pods at $1,500 each with carpet, power and shared monitors.
An evening on the show floor where exhibitors host customers and partners in their own booths; Tuesday 5 to 6:30 p.m. in 2026.
I/ITSEC is the all-services defense training and simulation floor, 502 exhibitors in 2025; choose it over WATS when your buyers are military training commands and program offices rather than airline and civil pilot schools. Compare I/ITSEC with the other defense and aerospace shows we build for →
Who exhibits at I/ITSEC 2026
Companies on NTSA's 2026 I/ITSEC exhibitor list. See the full list
- 4C Strategies
- Accenture
- Ace Computers
- Adder Technology
- ADS, Inc.
- Aechelon Technology (Shield AI)
- AeroVironment (AV)
- AGI
- Air National Guard
- Akima
- AMERICAN SYSTEMS
- Anatomage
- Aptima, Inc.
- ARA - Applied Research Associates Inc.
- Code Metal, Inc.
- XRT
02 Booths & pricing for I/ITSEC 2027
I/ITSEC booth rates per square foot and the turnkey packages
NTSA sells I/ITSEC space by the square foot: $39.00 for inline or one-corner booths and $40.00 for islands in 2026, $5.00 for approved military commands and a first-100-square-feet academic rate. It also offers fixed turnkey packages that cannot be altered. Purple builds from 10×20 up: trainer bays, VR pods, cockpit enclosures and islands with meeting rooms, sized to the move-in day each footprint gets.

Product demos, two-person teams
Shown: Seain Industry Co., Ltd, a Purple inline booth
See 10×20 rental booths →
Multiple product lines, a small meeting nook
Pictured: Rahman Group, a Purple inline booth
See 10×30 rental booths →
Hanging sign, open floor plan, lounge
Shown: SHC Heavy Industry, a Purple island exhibit
See 20×20 rental booths →
Demo stations plus private meetings
Shown: a Purple large-format exhibit for Bonomi
See 20×30 rental booths →In Purple's I/ITSEC price
- A 3D rendering of your I/ITSEC booth, revised until you approve it
- The structure, printed graphics, counters and storage your I/ITSEC plan specifies
- Lighting and power distribution inside your I/ITSEC booth
- Setup and teardown, with our project manager on the I/ITSEC floor
- Each service order and deadline in the I/ITSEC exhibitor kit, tracked for you
What I/ITSEC and its contractor bill
- Booth space, paid to National Training & Simulation Association
- Material handling at the venue, when the space rate does not include it
- Electrical service, internet and rigging at the venue
- Booth cleaning and whatever union labor the I/ITSEC venue requires
Rates to plan with for I/ITSEC:
- Industry space, 2026 $39.00 per sq ft inline or one corner; $40.00 per sq ft island or split island source
- Turnkey packages, 2026 Fixed packages at $8,500 and $15,000, designs not alterable source
- Shared booth fee, 2026 $1,500 per additional company, with show management approval source
- Purple rental booth 10×20 rental booths from $7,500; simulator platforms quoted per project source
We estimate each of these on your I/ITSEC proposal, so the total is on paper before you sign.
The prices above are all-in 2026 rental ranges covering design, structure, graphics, installation and dismantle; custom builds for I/ITSEC are quoted per project. The booth cost calculator gives an exact number for your I/ITSEC booth; the 2026 booth cost guide has the 2026 ranges.
Send the show, your booth size and what the space needs to do. Expect a reply within one business day and, usually within a week, a rendering and a fixed proposal for I/ITSEC. No charge.
Ready-made booths for I/ITSEC 2027
Rental booths priced for Orlando
Four of our ready-made designs with one all-in price for a show at Orlando, Florida: design, production, shipping, install, dismantle and the show paperwork. Pick one and we send a rendering with your graphics within 24 hours.
Brick-Look Wall and Edison Pendant Lights$34,000 all-in in Orlando12 items · design, build, shipping, install and dismantle
Logo Tower Header and Tablet Kiosks$22,230 all-in in Orlando7 items · design, build, shipping, install and dismantle
Glass Lounge and Private Meeting Room$47,500 all-in in Orlando14 items · design, build, shipping, install and dismantle
Bus Shelter Canopy and Banner Towers$25,350 all-in in Orlando9 items · design, build, shipping, install and dismantle
All booth rentals priced for Orlando10×20 rentals20×20 rentalsHow all-in pricing works
The booth we would build for I/ITSEC 2027
The try-it trainer bay with a viewing rail
At I/ITSEC the product is an experience, and buyers decide by sitting in it. The play is a bay built around one trainer, simulator cab or VR rig placed at the aisle, with a rail and a big repeater screen so the people waiting see what the trainee sees, and a quiet room behind for the program office.
Trainer bay
The simulator, cockpit or headset station on a low platform with cable management, lighting and room for an instructor beside the trainee.
Viewing rail
A rail and a large screen mirroring the trainee's view, turning a five-minute session into something ten more people watch.
Outcome wall
A back wall stating the training result (hours saved, readiness gained, a qualification reached) in words a training command uses.
Program room
A closed room with a screen for scenario reviews and acquisition talks, which also hosts guests at the Exhibitor Networking Night.
The demo
Run a short, scripted scenario of five minutes or less with a clear pass or fail moment, and log who tried it. Book the Innovation Showcase slot that comes with the booth to repeat the story to a seated audience.
The meetings
NTSA assigns exhibit-hall meeting rooms in October with a waitlist, so a room inside the booth is the dependable option, and it doubles as the hosting space for the Tuesday networking night.
Train like it's real. Prove it's ready.
Read before you design for I/ITSEC 2027
I/ITSEC exhibit rules: space rates, turnkey packages, move-in windows and age limits
I/ITSEC is a large indoor convention-center floor of inlines and islands carrying full simulators. NTSA's 2026 exhibitor pages, the latest published, set how space is priced and when each size of booth may build.
| Rule | What the manual says | What it means for your booth |
|---|---|---|
| 01Space pricing | Industry $39.00 per sq ft for inline or one-corner booths, $40.00 per sq ft for island or split island (2026) source | Islands cost only a dollar more per foot, so a simulator that needs open sides belongs on an island rather than a deep inline. |
| 02Turnkey packages | Fixed packages at $8,500 and $15,000; booths cannot be altered from the original designs and items cannot be substituted (2026) source | Anything beyond the package, such as monitors or demo hardware, is added around it, so we plan graphics and devices to fit the supplied structure. |
| 03Large-booth move-in | 800 sq ft and up from November 25 with direct freight and a pre-approval form; 400 sq ft and up from November 27 (2026) source | The early days are where cabs and motion bases go in, so crate delivery and the simulator vendor's technicians are booked to that date. |
| 04Holiday closure | No setup allowed on Thanksgiving Day, November 26 (2026 schedule) source | A big build loses a day in the middle of move-in, which we account for in the install plan and labor booking. |
| 05Small booth move-in | General move-in on the weekend; opening-day morning from 8 to 10 a.m. for 10 ft by 10 ft booths only, with show management pre-approval (2026) source | Even a compact booth should plan for the weekend, because the opening-morning slot is short and needs approval. |
| 06Booth sharing | Subletting or sharing prohibited without show management permission; $1,500 fee per additional company (2026) source | A prime and its partners showing in one booth should file the form and budget the fee before graphics name the partners. |
| 07Set-up access by age | No one under 16 in the exhibit hall during set-up or removal periods (2026) source | Install and dismantle teams are adults only, which matters when an exhibitor brings student interns from a university partner. |
03 Built by Purple
Simulation and training booths built to be tried at I/ITSEC




Case study · KLEEMANN
KLEEMANN at an industrial technology exhibition
KLEEMANN's booth used digital simulations next to real product showcases and a floor plan that walked visitors from step to step, close to what an I/ITSEC trainer booth needs: a working simulation people can try, and a clear route from the demo to a conversation.
Read the KLEEMANN case study All case studies →“If you’re looking for a trade show booth expert who shows up and gets the job done right, Purple Exhibits is the real deal.”
Magdalena Kulisz, Service Manager, Miss Immigrant USA · more Purple client reviews
Trusted by exhibitors including
04 Designing for flight and vehicle simulators, virtual and augmented reality training, synthetic environments, modeling and simulation software, AI training tools and workforce training companies selling to the armed services and allied militaries at I/ITSEC
Designing an I/ITSEC booth around a simulator people can sit in
1Let people sit in it
Simulation buyers judge by trying. We place the seat, headset or controls at the aisle edge with a short queue line and a viewer screen, so a crowd watching one pilot becomes the attraction.
2Build for your move-in day
In 2026, booths of 800 sq ft and up could start Wednesday with direct freight, 400 sq ft and up on Friday after Thanksgiving, and everyone else that weekend. A heavy simulator needs the earlier slot and the pre-approval form from The Expo Group.
Darkness is a design tool
Screens and projection read better in shade, so we roof part of an island or build a semi-enclosed theater for synthetic environments, with open sides for staff and conversation.
Use the networking night
NTSA's Exhibitor Networking Night happens inside the booths on the show floor. A small hosting counter and a clear space for 20 guests turn the booth into the evening's room.

Concept rendering
A rendering like this comes with every proposal
You see the booth in 3D before we cut a single panel: layout, graphics, lighting and product positions, revised until it is right. Pictured: a Purple concept for Requtech.
Start my I/ITSEC conceptFloor at a glance
Where you could be at I/ITSEC 2027
I/ITSEC fills the South Concourse with the hall, papers and ceremonies under one roof. This is how the 2026 schedule, the latest published, used the floor.
Exhibit hall
Open noon to 6 p.m. on Monday, noon to 6:30 p.m. Tuesday, 9:30 a.m. to 6 p.m. Wednesday and 9:30 a.m. to 3 p.m. Thursday in 2026.
Our advice Monday and Tuesday mornings belong to tutorials and the opening ceremony; schedule key demos for the afternoons.
Exhibitor Networking Night
Tuesday, 5 to 6:30 p.m. in 2026, held on the show floor with exhibitors hosting guests in their booths.
Our advice Plan drinks and a short hosted demo; invitations go out before the show.
Traditional Trades Pavilion
New in 2026: a shared pavilion of eight exhibitor pods for welding, pipefitting, electrical and additive manufacturing training.
Our advice Each $1,500 pod comes with carpet, power and shared monitors; bring graphics and a compact demo.
05 Orlando, Florida · Orlando
I/ITSEC move-in by booth size, The Expo Group and the OCCC South Concourse
The Expo Group is I/ITSEC's general services contractor, and its exhibitor portal handles shipping instructions, furniture and carpet, electrical, rigging, AV, internet, catering, booth insurance and lead retrieval. In 2026 move-in ran by booth size: 800 sq ft and up from November 25 with direct freight and a pre-approval form, closed on Thanksgiving, 400 sq ft and up from November 27, general move-in November 28 and 29, and approved 10 ft by 10 ft booths for two hours on opening morning. Move-out ran from 3 to 7 p.m. on the closing day and the next morning. Our project manager files the size-based approval and runs the build with the labor the show requires.
Hall rules, drayage estimates and freight deadlines for the building that hosts I/ITSEC are in our Orange County Convention Center exhibitor guide.
What Purple handles
- Simulator platforms, cockpit enclosures and VR pods
- Theater-style shade structures for synthetic environments
- Hanging signs and rigging orders through The Expo Group
- Size-based move-in requests and freight scheduling
- Networking Night hosting counters inside the booth
- Reuse at WATS, AUSA and Modern Day Marine
I/ITSEC timeline, counted back from move-in
Design sign-off for I/ITSEC is due by summer 2027.
- December 2026Walk I/ITSEC 2026 (Nov 30 to Dec 3) with us; brief on the trainer or simulator you plan to show and the footprint it needs.
- Spring 2027Reserve space when NTSA opens 2027 sales; concept design around the simulator, power and rigging loads.
- Summer 2027Engineering for platforms, enclosures and hanging signs; The Expo Group orders and the targeted move-in request.
- Fall 2027Fabrication and print in our Fishkill, NY or Las Vegas shop; exhibitor badge registration and freight booking.
- Show week 2027Size-based move-in, four show days, then a short move-out; the Purple project manager leads both with the labor the show requires.
Planning timeline from Purple. We confirm the official move-in, freight target and order deadlines for the venue against your booth when you book; they come from your exhibitor kit and assigned schedule.
Printable I/ITSEC budget & deadline sheetBefore you book I/ITSEC 2027
What seasoned I/ITSEC exhibitors plan for in Orlando
Exhibitor badges are not capped: NTSA gives exhibiting companies as many staff badges as they need to run the booth, so plan staffing around demo shifts, not a badge count. source
The opening-morning slot for 10 ft by 10 ft booths needs show management pre-approval and lasts only two hours, so even a small booth should aim for the weekend move-in. source
Exhibitor badges include the Monday tutorials, opening ceremony and professional development workshops once paid attendees are seated; upgrade to full conference for guaranteed seats. source
Military commands with a .mil email can exhibit at $5.00 per square foot with approval, so a service lab partner can take its own space near yours at low cost. source
Thanksgiving Day is closed to setup on the move-in calendar, so freight for a large booth has to land before the holiday or roll to the Friday slot. source
Who you meet on the floor
NTSA describes key leaders from DoD, international militaries, primes and acquisition offices walking the floor; 3,700 government attendees came in 2025.
2,096 international visitors from 55 countries attended in 2025, per NTSA.
NTSA lists warfighter-focused program offices, innovation accelerators and FFRDCs among the people exhibitors meet.
The 2026 Traditional Trades Pavilion targets apprenticeship programs, shipbuilders and technical schools looking for training tools.
Side by side
I/ITSEC vs AUSA Global Force vs Modern Day Marine: 2027 at a glance
| I/ITSEC | AUSA Global Force | Modern Day Marine | |
|---|---|---|---|
| Dates | 2027 dates not confirmed yet | March 16–18, 2027 | April 13–15, 2027 |
| Where | Not confirmed yet | Huntsville, AL · Von Braun Center | Washington, DC · Walter E. Washington Convention Center |
| Size | 216,200 net square feet of training and simulation exhibits at I/ITSEC 2025, per NTSA | 7,300+ attendees at Global Force 2026 | 84,000+ square feet of Marine Corps exhibits filled by 350+ companies in 2026 |
| Main buyers | Training and readiness leaders from DoD | Army Materiel Command staff | Marine Corps Systems Command program managers |
| Booth space | Industry space, 2026: $39.00 per sq ft inline or one corner; $40.00 per sq ft island or split island | Hall booth space, 2027: $53 National Partners, $63 Community Partners, $78 non-members, $27 government, per sq ft | Price not published |
Figures carry the year and source shown on each show's own page.
Travel to I/ITSEC 2027
Getting to I/ITSEC 2027: airport, hotels and parking
Fly in
Orlando International Airport (MCO), about 12 miles from the Orange County Convention Center, the 2026 venue
Distance per the OCCC. The 2026 show sits in the OCCC South Concourse, next to the Hyatt Regency Orlando and across from the Rosen Centre, per NTSA
Stay
2027 housing not confirmed yet; NTSA publishes the hotel program with each edition
Park
Parking at the Orange County Convention Center is set by the venue
Travel facts from iitsec2026.smallworldlabs.com.
I/ITSEC by the numbers
I/ITSEC year by year
How I/ITSEC 2027 compares with other defense and aerospace shows
The defense and aerospace shows closest to I/ITSEC on the calendar, with the latest size each organizer has published. Each name other than I/ITSEC opens our exhibitor guide for that show.
| Show | Dates | City | Latest published size |
|---|---|---|---|
| AMOS ConferenceMaui Economic Development Board (MEDB) | September 14–17, 2027 | Maui, HI | 1,000+ attendees · 35 exhibitors (2026) |
| AFA Air, Space & Cyber ConferenceAir & Space Forces Association (AFA) | September 20–22, 2027 | National Harbor, MD | nearly 300 exhibitors (2026) |
| ACI-NA Annual Conference & ExhibitionAirports Council International – North America (ACI-NA) | October 4–7, 2027 | New Orleans, LA | September 14–17, 2026, Pennsylvania Convention Center; 2,000+ airport professionals, per ACI-NA |
| IEEE MILCOMIEEE Communications Society (IEEE MILCOM) | October 18–22, 2027 | San Antonio, TX | not confirmed yet (2026) |
| NBAA-BACENational Business Aviation Association (NBAA) | October 19–21, 2027 | Las Vegas, NV | 100+ first-time exhibitors (2026) |
| AFCEA TechNet Indo-PacificAFCEA International | October 25–28, 2027 | Honolulu, HI | 4,500+ decision makers promoted attendees (2026) |
| AOCAssociation of Old Crows (AOC) | December 1–3, 2027 | National Harbor, MD | 100+ exhibitors (2026) |
| Spacepower ConferenceSpace Force Association (SFA) | 2027 dates not confirmed yet | Orlando, FL | not confirmed yet (2026) |
| AAAE Aviation Security SummitAmerican Association of Airport Executives (AAAE) | 2027 dates not confirmed yet | Arlington, VA | – |
| I/ITSECNational Training & Simulation Association (NTSA) | 2027 dates not confirmed yet | Orlando, FL | not confirmed yet (2026) |
I/ITSEC exhibitor questions
I/ITSEC 2027 exhibitor questions
When is I/ITSEC 2027?
The 2027 dates are not confirmed yet. NTSA has published only the 2026 edition, November 30 to December 3, 2026, held in the convention center's South Concourse in Orlando, next to the Hyatt Regency.
How much does I/ITSEC exhibit space cost?
$39.00 per square foot for inline or one-corner booths and $40.00 for islands and split islands at the 2026 show, per NTSA. Approved military commands pay $5.00 per square foot, and academic exhibitors pay $1,500 for the first 100 square feet.
What is the I/ITSEC turnkey booth package?
A fixed custom booth from NTSA: $8,500 for a 10×10 package and $15,000 for a 10×20 package in 2026. The designs cannot be altered and items cannot be substituted; extra orders are billed by The Expo Group.
How big is the I/ITSEC show floor?
216,200 net square feet in 2025, with 502 companies in 463 exhibit spaces, per NTSA. The same year counted 8,367 exhibit visitors and 4,298 conference attendees.
When is I/ITSEC move-in?
The 2027 schedule is not confirmed yet. In 2026 move-in started November 25 for booths of 800 sq ft and up (direct freight, pre-approval), November 27 for 400 sq ft and up, November 28 and 29 for everyone, and opening morning for approved 10×10 booths only.
Who is the general contractor at I/ITSEC?
The Expo Group, per NTSA's 2026 exhibitor services page. Its portal covers shipping, furniture, carpet, electrical, rigging, AV, Wi-Fi, catering, booth insurance and lead retrieval.
Can two companies share an I/ITSEC booth?
Only with permission. Subletting or sharing a booth is prohibited without show management approval, and each additional company is charged $1,500, per NTSA's 2026 cost page.
How many exhibitor badges come with an I/ITSEC booth?
As many as the booth needs: NTSA allocates exhibiting companies the staff badges required to run the booth during show hours. Full conference access is a separate paid upgrade.
Are children allowed on the I/ITSEC floor?
Ages 12 to 15 may enter during exhibit hours only with a parent or chaperone and children under 12 are never admitted, per NTSA. During set-up and removal the hall is closed to anyone younger than 16.
Can we get a meeting room at I/ITSEC?
NTSA offers meeting rooms in the exhibit hall area of the convention center, assigned in October before the show. In 2026 there was a waitlist handled by the NTSA exhibits team.
Is I/ITSEC worth it for a small training company?
It can be: the Traditional Trades Pavilion launched in 2026 with eight $1,500 pods for trade-school, apprenticeship and simulation-training firms, and every booth includes a slot for Innovation Showcase presentations.
What is the difference between I/ITSEC and WATS?
I/ITSEC is NTSA's all-services defense training and simulation show with 500+ exhibitors in Orlando each fall. WATS, also in Orlando, is Halldale's World Aviation Training Summit for airline and civil pilot training.
Before you sign for I/ITSEC
Ask any I/ITSEC exhibit builder these five questions:
- Which I/ITSEC move-in window does our footprint get, and will you file The Expo Group pre-approval form?
- Can your platform carry our simulator's weight and hide the cabling without blocking the trainee's view?
- How will you light a projection or VR area so it reads in a bright convention hall?
- Will rigging, electrical and internet orders go through The Expo Group portal on time?
- Can the same structure travel to WATS or AUSA without being rebuilt?
What I/ITSEC exhibitors ask us
Our simulator is heavy and big. Can it even get in? Yes, that is why NTSA runs move-in by booth size, with direct freight and a pre-approval form for 800 sq ft and larger booths days ahead. We plan crate sizes, platforms and power drops around that window.
Should we take the turnkey package instead of a custom booth? The turnkey packages are a fast start, but they cannot be altered or substituted. If you need a seat, a motion base or a projection screen, a custom inline or island gives the demo the space and lighting it needs.
NTSA has not posted 2027 dates. Should we start now? Yes. Space sells by the square foot on a large floor, and simulator enclosures take months to engineer, so starting late costs options. We design to the 2026 rules and finalize when NTSA publishes the 2027 schedule.
Get a proposal
Tell us about your I/ITSEC booth
What happens next
- You get a reply within one business day, asking about your products, goals and footprint at I/ITSEC.
- A concept rendering and a fixed proposal usually follow within a week. Each I/ITSEC fee listed upfront and in full, on paper.
- We build in 30 to 45 days, ship to the advance warehouse and have the booth installed before I/ITSEC opens.