
industrial machinery · Rosemont
Powder Show 2027Exhibitor guide: booth costs, dates and deadlines in Rosemont
From inlet to outlet: Powder Show 2027 booths in Rosemont that show the flow
- Event dates
- April 27–29, 2027
- Exhibit hall
- April 27–29, 2027 (Tue–Wed 9 a.m.–4 p.m., Thu 9 a.m.–3 p.m.)
- Venue
- Donald E. Stephens Convention Center, Rosemont
4.9 client ratingSince 201510,000+ booths built3,000+ exhibitors


Quick answers
Powder Show 2027 in 30 seconds
The short version for Powder Show exhibitors. Every figure here has its source further down the Powder Show page.
- When is Powder Show 2027?
- April 27–29, 2027, at Donald E. Stephens Convention Center, Rosemont.
- When is the hall open at Powder Show?
- April 27–29, 2027, Tue–Wed 9 a.m.–4 p.m., Thu 9 a.m.–3 p.m.
- How big is Powder Show?
- 2,500+ attendees (2025 edition).
- What does a 10×20 Powder Show booth cost all-in?
- From $16,400 for a Purple rental in Rosemont: design, graphics, furniture, lighting, shipping both ways, install and dismantle. Space, drayage and show services are billed separately by Powder Show.
Official Powder Show 2027 links: Powder Show 2027 hotelsPowder Show 2027 booth space
The lookRosemont 2027
Flow, not dust. Silos to sacks.
The International Powder & Bulk Solids Conference & Exhibition runs April 27–29, 2027 at the Donald E. Stephens Convention Center in Rosemont. Its Why Exhibit page says 89% of attendees specify or buy and 73% have projects within 12 months.







Everything about Powder Show 2027 in one place
Powder Show 2027 fact sheet
| Official name | International Powder & Bulk Solids Conference & Exhibition 2027 (The Powder Show, iPBS 2027) |
|---|---|
| Event dates | April 27–29, 2027 |
| Exhibit hall dates | April 27–29, 2027 (Tue–Wed 9 a.m.–4 p.m., Thu 9 a.m.–3 p.m.) source |
| Venue | Donald E. Stephens Convention Center 5555 N River Rd, Rosemont, IL 60018 |
| Organizer | Informa Markets |
| Size (2025) | 2,500+ attendees source |
| Who attends | Executive managers and plant owners, senior manufacturing and production engineers, process engineers, process improvement and safety engineers, facility maintenance managers |
| Nearest airport | Chicago O'Hare International Airport (ORD) |
| Hotels | onPeak, the only official hotel provider for iPBS 2027; hotel rates not confirmed yet Official hotel page → |
| Official website | powderandbulkshow.com |
Official Powder Show resources
Powder Show 2027 calendar
Powder Show 2027 show dates
Powder Show 2027 show days, each with a link to the page that states it.
01 Purple at Powder Show 2027
From inlet to outlet: Powder Show 2027 booths in Rosemont that show the flow
We build Powder Show booths where a process engineer can follow a powder from the hopper to the discharge and ask how it would behave with their own material. At the Donald E. Stephens Convention Center, freight comes off River Road docks, so we time heavy equipment ahead of the walls.
- Apr 27–29, 2027 · Rosemont
- 2,500+ attendees in 2025
- Dust, conveying, feeding
What makes Powder Show different, and how we build for it
Informa Markets bills the International Powder & Bulk Solids Conference & Exhibition, The Powder Show, as the only event in the Western Hemisphere built around powder and bulk solids handling and dry processing.Exhibitors supply process plants in food, chemicals, pharmaceuticals, mining and minerals, plastics and pulp and paper, and the organizer reports that 89% of them recommend, specify or make the final call. The two-day conference, free Expo Floor Education sessions on pneumatic conveying, storage and feeding, and the Women in Processing community fill the days around the floor. A visitor here arrives with one material and one problem, so the booth that shows what goes in, what happens inside and what comes out starts the real conversation.
A labeled sample of the material your equipment handles, the inlet and outlet in plain view, and an engineer who can talk flowability, bridging, segregation and how their own powder would behave.
Access doors, seals, filter changes and cleaning points they can see and touch, plus a straight answer on combustible dust protection and how long a changeover takes.
A process map that shows where your stage sits in the line, what it saves, and a quiet table where a project planned for the next 12 months can start.
Your team in Rosemont
Two shops, one project manager, every hall
We build in our own production shop in Fishkill, NY, and our Las Vegas hub, ship to the Donald E. Stephens Convention Center, and install with our own project manager on the floor and vetted local labor. Every Powder Show build runs a predictable 30 to 45 days and gets a pre-show QA, with secure storage after.
The booth is lit and stocked when your team reaches the Donald E. Stephens Convention Center. You just show up.
Inside Powder Show 2027
Powder Show rules that shape your booth
Space and sponsorship spend earn a point per $3,500 at this Informa Markets show, with extra points for being on the floor, prior-year media buys and virtual events. We keep your booth modular so it can move up when your total does.
Each 100 square feet of space comes with up to 10 exhibitor badges, collected on arrival; badges beyond that are billed. A 10×20 can therefore staff a sizable team, so we plan seating and sample-restock space for everyone on the rota.
No one under 18 may enter the expo halls or conference rooms, and no childcare is offered. We plan staffing rotations and demo operators on that basis.
The Exhibitor Center tells exhibitors to work only with the approved vendors it lists, RES for show services and onPeak for housing, and to treat outside hotel and list sellers as possible scams. We order every show service through those listed channels.
Programs worth planning for
Two conference days, April 27–28, 2027, 8 a.m. to 4 p.m.; the 2025 program ran more than 30 sessions. Engineers leave the sessions and walk straight onto the floor.
Free sessions on pneumatic conveying, storage, feeding and more, held on the stages and theaters of the expo floor, a few steps from the equipment they discuss.
The show's networking group for women in powder and bulk solids processing, with mentorship and in-person and virtual meetups; it held a panel on day two of the 2025 show.
The Powder Show is the U.S. floor devoted to dry bulk handling: feeders, conveying, mixing and dust control. Choose it over PROMAT when your equipment moves powders and granules inside a process rather than cartons and pallets through a warehouse. Compare every industrial machinery show we build for →
industrial machinery at Powder Show
The industry behind Powder Show, in pictures






02 Booths & pricing for Powder Show 2027
Popular booth sizes at Powder Show
Powder Show floors mix island stands where feeders, mixers, dryers and dust collectors sit full size with inline booths for valves, instruments and components. We recommend a 10×20 for one machine and a sample counter, and a 20×20 or larger when you want a short process sequence running from inlet to outlet.

One feeder, valve or sifter with inlet, outlet and service door facing the aisle, a sealed sample library by application and a standing drawing surface.
Shown: a Purple inline booth for SunUs
See 10×20 rental booths →
A loss-in-weight feeder in the center bay, a clear-panel cutaway of the conveying line beside it, and a sizing table where an engineer can sketch a customer's layout.
Above: Han Song, a Purple inline booth
See 10×30 rental booths →
A two-stage sequence such as feed and mix under a hanging sign, a looped video of the line in a working plant and an open meeting table.
Shown: SHC Heavy Industry, a Purple island exhibit
See 20×20 rental booths →
Full-size mixers or dust collectors set by forklift, a walk-around demonstration line, a closed meeting room and storage for sample restock.
Shown: Bonomi, a Purple large-format exhibit
See 20×40 rental booths →In Purple's Powder Show price
- Design and a 3D rendering for Powder Show, revised until it is right
- The structure, printed graphics, furniture, counters and storage your Powder Show plan specifies
- Lighting and power distribution inside the booth
- Shipping both ways, install and dismantle at Powder Show, led by our project manager on the floor
- Each service order and deadline in the Powder Show exhibitor kit, tracked for you
Billed by the organizer and the show contractor
- Your Powder Show booth space, paid to the organizer
- Material handling / drayage, if the Powder Show space rate leaves it out
- Electrical, internet and rigging orders for Powder Show
- Booth cleaning and any union labor the Donald E. Stephens Convention Center requires
Rates to plan with for Powder Show:
- Drayage (Purple venue guide) About $145 per cwt for crated advance-warehouse freight, from a 2026 Rosemont freight guide source
- Payment schedule Deposits step from 30% to 60% to the full balance by six months before opening source
- Expo admission Free for qualified registrants who register online; $199 on site source
Every one of these is estimated on your proposal, so you see the full Powder Show total on paper before you sign.
Prices shown are all-in rental starting prices for design, graphics, furniture, lighting, shipping both ways, installation and dismantle at Powder Show; space, drayage and show services are extra, and custom builds get their own quote. For an exact Powder Show figure, try the booth cost calculator; the 2026 booth cost guide has the ranges.
Send us your booth size for Powder Show and what the space needs to do. Our reply comes within one business day; the rendering and fixed proposal usually arrive within a week. No charge.
Ready-made booths for Powder Show 2027
Rental booths priced for Chicago
Four of our ready-made designs with one all-in price for a show at Donald E. Stephens Convention Center: design, graphics, furniture, lighting, shipping both ways, install, dismantle and the show paperwork; space, drayage and show services are extra. Pick one and we send a rendering with your graphics within 24 hours.
Glass Jewelry Showcases and Storage RoomFrom $39,800 all-in9 items · design, graphics, furniture, lighting, shipping both ways, install and dismantle
Overhead Portal Frame and Staggered Graphic WallsFrom $25,650 all-in8 items · design, graphics, furniture, lighting, shipping both ways, install and dismantle
Glass Lounge and Curved Reception CounterFrom $40,150 all-in12 items · design, graphics, furniture, lighting, shipping both ways, install and dismantle
Square Hanging SignFrom $30,900 all-in7 items · design, graphics, furniture, lighting, shipping both ways, install and dismantle
All booth rentals priced for Chicago10×20 rentals20×20 rentalsHow all-in pricing works
At Powder Show, your team walks into a lit, stocked booth. You just show up.
03 Built by Purple
Our booths, designed, built and installed, to compare for Powder Show




Case study · KLEEMANN
KLEEMANN at an industrial technology exhibition
An interactive booth for a global elevator manufacturer, combining digital simulations and real product showcases on a floor plan that led visitors from first step to last.
KLEEMANN paired heavy machines with simulations and a guided route, the same job a feeder or mixer maker faces when the action happens inside a closed steel housing.
Read the KLEEMANN case study All case studies →“Purple Exhibits made us look good. The booth was one of the nicest displays in our section of the convention center and generated a lot of positive comments from both customers and industry peers. Their attention to detail, professionalism, and willingness to go above and beyond made a huge difference.”
Kimberly Owens, Brand Manager, Owens Products · what other clients say
Trusted by exhibitors including
04 Designing for bulk-material handling and dry-processing equipment makers at Powder Show
Four things we get right for Powder Show exhibitors
1Show the material, not the catalog
Powder Show visitors ask about their own material first. We build sealed, labeled sample jars by application, from food powders to minerals and plastics pellets, beside the machine that handled them, so an engineer can compare particle size and flow before your specialist says a word.
2Cut away what the housing hides
Pneumatic conveying, feeding and mixing all happen inside steel. We add clear inspection panels, cutaway sections or a looped video of the transfer next to the real unit, and run the graphic in the same direction as the machine so the process reads left to right.
3Answer the dust question up front
Dust collection and air pollution control are among the solutions attendees list first on the organizer's own page. If you sell filters, venting or explosion protection, we put the access door, the cartridge change and the certification details at eye level, where maintenance managers look first.
4Room for the 12-month project
The organizer reports that 73% of attendees have projects now or in the next 12 months. We give a host the aisle, then a seated table a step back with a screen for layout drawings, so a sizing discussion can run while the next group studies the samples.

Concept rendering
Every Powder Show proposal includes a rendering like this
You see your Powder Show booth in 3D before we cut a single panel: layout, graphics, lighting and product positions, revised until it is right. Pictured: a Purple concept for RPS.
Start my Powder Show conceptFloor at a glance
Where you could be at Powder Show 2027
Informa Markets has not published its 2027 hall plan for the Donald E. Stephens Convention Center, so here is how the building itself shapes a dry-processing equipment booth.
Main exhibit halls
About 840,000 square feet of divisible exhibit space, used for islands, hanging signs and forklift work, per Purple's venue guide.
Our advice We draw machine envelopes and forklift paths first, then place walls and sample counters around them once your booth number arrives.
River Road docks
Loading docks with direct River Road access, reached from the Kennedy and Tri-State expressways without downtown Chicago traffic.
Our advice Skid-mounted equipment can ship direct to the dock on a booked slot while booth crates go through the advance warehouse.
Skybridge garage
A multi-level parking garage linked to the center by an enclosed skybridge.
Our advice Your staff can park beside the hall each morning, which makes early sample restocking before the 9 a.m. opening easy.
05 Donald E. Stephens Convention Center · Rosemont
Logistics for Powder Show 2027, handled
Freight trucks come straight off the Kennedy and Tri-State expressways to the Rosemont building's River Road docks, with no Loop traffic in the way. Illinois has no right-to-work law, and RES, the official show contractor, handles material handling, labor, rigging and freight. Purple's venue guide plans about $145 per hundredweight for crated advance-warehouse freight in this building. Move-in and dismantle hours for 2027 are not confirmed yet. We read the exhibitor portal when it opens, book forklift placement for heavy equipment, file flame certificates and a certificate of insurance naming the organizer and the Village of Rosemont, and our project manager directs the hired local crew through install and load-out.
Powder Show exhibitors can find this building's hall rules, drayage estimates and freight deadlines in our Donald E. Stephens Convention Center exhibitor guide.
What Purple handles
- Exhibitor portal orders, freight targets and forklift placement
- Machine platforms sized to your equipment weights
- Sealed sample libraries and clear-panel cutaways
- Process graphics that run the same direction as the line
- Certificates of insurance and flame certificates for Rosemont
- Forklift timing and machine leveling before walls go up

Counted back from move-in
We need your Powder Show design signed off by mid-February 2027.
- Mid-February 2027Design sign-off with machine weights, footprints, power and compressed air fixed.
- Late February to March 2027Production in our Fishkill, NY shop over 30 to 45 days; machine platforms, sample cases and cutaways built.
- Early April 2027Booth crates ship to the advance warehouse; heavy equipment booked for direct delivery.
- Days before April 27, 2027Move-in; equipment set by forklift and leveled, then our project manager installs the booth.
- April 27–29, 2027Expo days, 9 a.m. to 4 p.m. on the first two days and 9 a.m. to 3 p.m. on the last.
- After the expo closes April 29, 2027Dismantle, machines loaded out on your carrier's schedule, booth to storage or the next show.
Purple's planning timeline for Powder Show. The official Powder Show move-in, freight target and order dates come from your exhibitor kit and assigned schedule; when you book, we confirm them against your booth.
Printable budget & deadline sheetTravel to Powder Show 2027
Getting to Powder Show 2027: airport and hotels
Fly in
Chicago O'Hare International Airport (ORD)
Stay
onPeak, the only official hotel provider for iPBS 2027; hotel rates not confirmed yet
Find the venue
Donald E. Stephens Convention Center
5555 N River Rd, Rosemont, IL 60018
Travel facts from powderandbulkshow.com.
Powder Show by the numbers
Powder Show year by year
How Powder Show 2027 compares with other industrial machinery shows
The industrial machinery shows closest to Powder Show on the calendar, with the latest size each organizer has published. Each show name opens our industrial machinery exhibitor guide for that show.
| Show | Dates | City | Latest published size |
|---|---|---|---|
| ProMatMHI | April 19–21, 2027 | Chicago, IL | 52,223 attendees · 1,160 exhibitors (2025) |
| Metalcasting CongressAmerican Foundry Society (AFS) | April 20–22, 2027 | Cleveland, OH | 2,200+ attendees · 230 exhibits (2023) |
| TAPPIConTAPPI | April 24–28, 2027 | Indianapolis, IN | 100+ exhibitors (2026) |
| Powder ShowInforma Markets | April 27–29, 2027 | Rosemont, IL | 2,500+ attendees (2025) |
| WQA Convention & ExpoWater Quality Association | April 28–30, 2027 | Phoenix, AZ | 2,500+ attendees, WQA 2027 prospectus |
| AISTechAssociation for Iron & Steel Technology (AIST) | May 3–5, 2027 | Nashville, TN | 9,711 attendees · 652 exhibitors (2026) |
| NPEPlastics Industry Association (PLASTICS) | May 3–7, 2027 | Orlando, FL | 51,396 attendees · 2,202 exhibitors (2024) |
| InterwireThe Wire Association International (WAI) | May 4–6, 2027 | Atlanta, GA | 3,184 attendees · 335 exhibitors (2023) |
| PMTSPrecision Machined Products Association (PMPA) and Gardner Business Media | May 4–6, 2027 | Cleveland, OH | 6,662 attendees · 338 exhibitors (2025) |
| AutomateAssociation for Advancing Automation (A3) | May 10–13, 2027 | Las Vegas, NV | 50,000+ attendees · 1,200+ exhibitors (2026) |
Powder Show exhibitor questions
Questions exhibitors ask us before Powder Show
How much does a booth at the Powder Show 2027 cost?
For a single feeder or valve on display, a 10×20 rental from us starts at $16,400; the rental includes shipping and install. A 20×20 island with a running sequence starts at $17,200 (freight both ways included) rented or $50,000 to $120,000 custom. Informa Markets prices space by booth option through its sales team, and machine freight and forklift time move the total most here.
When do we have to pay for Powder Show booth space?
Your Informa Markets contract carries the exact dates; the FAQ describes deposits rising from 30% about a year ahead to 60% in the middle months and the full balance half a year before opening. From our side, design sign-off by mid-February 2027 keeps a 30 to 45 day build on track.
Can we rent a booth for the Powder Show, and what does a rental include?
A rental from us covers the frame, printed graphics, lighting, counters, a meeting table, flooring, shipping, install and dismantle. Equipment makers often rent the structure and add a custom platform or sample case built to their machine, then keep those pieces for the next processing show.
Can you set heavy equipment at the Donald E. Stephens Convention Center?
We plan the floor around each machine's weight, footprint and service side, book forklift placement through the show's contractor and set equipment before the walls go up. The building's River Road docks take trucks straight off the expressways, which helps when a mixer or dust collector ships on its own skid.
What does drayage cost at the Powder Show?
RES bills freight handling by weight to each exhibitor. For this building Purple's venue guide budgets roughly $145 for every 100 pounds of crated advance-warehouse freight, taken from a 2026 freight guide for another show in the same hall. The Powder Show's 2027 material handling rates are not confirmed yet, so your proposal lists our crate-by-crate estimate.
How do priority points work at the Powder Show?
Points build from what you spend with Informa Markets: each $3,500 of space or sponsorship earns a point, showing up earns another, and media buys in the run-up year and virtual events add more. Higher totals pick space earlier, so we draw a layout that can step up from inline to island as your total climbs.
Can we reuse our Powder Show booth at other shows?
Bulk handling suppliers often take the same kit to PROMAT or MODEX for material handling buyers, or to Pack Expo Southeast for packaging lines. We design platforms and walls that resize from a 10×20 to an island, swap graphics per audience and store everything between shows.
Do you handle RES orders and freight for the Powder Show?
We do. RES is the official contractor for furnishings, material handling, labor, rigging, freight and signage. Once Informa Markets opens the 2027 exhibitor portal, we file electrical, compressed air, forklift and freight orders, book the advance warehouse and copy you on every confirmation. Move-in hours are not confirmed yet.
When is the Powder Show 2027?
The Powder Show 2027 runs April 27–29, 2027. The expo is open 9 a.m. to 4 p.m. on April 27 and 28 and 9 a.m. to 3 p.m. on April 29, and the conference runs April 27–28 from 8 a.m. to 4 p.m.
Where is the Powder Show 2027 held?
In Rosemont, Illinois, the Chicago suburb beside O'Hare: the show fills the Donald E. Stephens Convention Center on River Road. The show has used this building for its recent editions, including 2023 and 2025.
How many people attend the Powder Show?
The 2025 Powder Show in Rosemont drew more than 2,500 attendees, and the 2023 edition more than 4,000 attendees with over 320 exhibiting companies, per Informa's Powder & Bulk Solids. The organizer's current expo page cites 3,000+ expo attendees, 350+ exhibitors and 30 countries.
Is the Powder Show open to the public?
No. Expo registration is free online for qualified industry professionals, registering on site costs $199, and non-exhibiting manufacturers pay a fee. No one under 18 may enter the expo halls or conference rooms, and no childcare is offered on site, per the organizer's FAQ.
Who organizes the Powder Show?
Informa Markets, which also lists the PBS SOUTH, PBS Montreal, Toronto PBS and PBS Texas regional events on the show site. Its Powder & Bulk Solids media brand covers the industry year round and publishes each edition's attendance.
How do Powder Show exhibitors book hotels near Rosemont?
onPeak is the only official hotel provider for iPBS 2027, and 2027 rates are not confirmed yet. Chicago O'Hare International Airport (ORD) is the nearest major airport to the Donald E. Stephens Convention Center.
Before you sign for Powder Show
Ask any Powder Show exhibit builder these five questions:
- Are all fees on paper, including what the contractor at the Donald E. Stephens Convention Center bills?
- Who actually builds it for Powder Show: your shop or a subcontractor?
- Will your project manager be on the floor for install and dismantle?
- What does the rental include, and what is billed by Powder Show?
- What happens to the booth after Powder Show, and what does storage cost?
Common situations
Already own a booth? We refresh the graphics, repair what is worn, ship it to the Donald E. Stephens Convention Center, install it and store it between shows. You keep the structure you paid for and bring it to Powder Show.
Exhibiting from outside the US? We are your team on the ground at the Donald E. Stephens Convention Center: freight to the advance warehouse, show-service orders, installation and storage, with one project manager on your emails in your time zone.
Short on time? In two to three weeks, a rental with your graphics can be ready for Rosemont. The first call tells you what is realistic for your date.
Get a proposal
Tell us about your Powder Show booth
What happens next
- Within one business day we write back to ask about your products, your goals for Powder Show and your footprint.
- Usually within a week, you receive a concept rendering and a fixed Powder Show proposal. Every last fee for Powder Show, listed upfront and in full on paper.
- We build in 30 to 45 days, ship to the advance warehouse and have the booth installed before Powder Show opens.