Texprocess Americas 2027 · May 11–13, 2027 · Georgia World Congress Center, Atlanta
Texprocess Americas 2027 booth design & build in Atlanta
Custom and rental exhibits for sewing, cutting, automation and software companies, built around a running machine and a finished sample. Operator envelopes, power and close-up screens planned from day one, with Shepard drayage and installation handled by our on-site team.
- May 11–13, 2027
- Georgia World Congress Center
Every last fee listed upfront, in full, on paper. 3,000+ exhibitors · 10,000+ booths built · 4.9★ client rating · Since 2015
Rows of industrial sewing machines in a textile workshop
01 Purple at Texprocess Americas 2027
What makes Texprocess Americas different, and how we build for it
Texprocess Americas is the one North American floor where sewn-product production is shown running. Messe Frankfurt and SPESA build the show around Machinery & Technology in Action, Solutions for Smarter Production and the Education & Industry Insight programme, and Techtextil North America shares the Georgia World Congress Center halls, so a material buyer and a machinery buyer walk the same aisles. Visitors come to watch a cut, a seam or a software pass, then inspect what came out. A booth that gives the operator room, gets the small action onto a screen and puts the finished piece within reach earns the second conversation about fit in their own plant.
A machine they can watch complete a cycle, the throughput and floor-space numbers beside it, and a specialist who can talk about integration with their line.
Finished samples they can handle, organized by application such as apparel, upholstery or automotive, with a quiet table to discuss capacity and lead times.
A close-up view of the working area, a software workstation with a prepared project, and access to the technical team for detailed questions.
Your team in Atlanta
Two shops, one project manager, every hall
We build in our own production shop in Fishkill, NY and our Las Vegas hub, ship to the Georgia World Congress Center, and install with our own project manager on the floor and vetted local labor. Predictable 30–45-day turnarounds, secure storage and pre-show QA.
Your team lands to a lit, stocked booth. You just show up.
02 Booths & pricing for Texprocess Americas 2027
Pick a footprint. We price it as a rental, a custom build, or a hybrid.
Texprocess Americas floors mix machinery islands from the automation and cutting brands with 10×10 and 10×20 inlines from software, needle and component suppliers. Exhibitors here usually take a 10×20 with one running machine or a 20×20 island with two demo stations, a sample wall and a meeting table under a hanging sign.
One sewing head or a software workstation, a labeled sample board and a stool for a conversation.
Shown: Genetec, a Purple inline booth
See 10×10 rental booths →
One running machine with its operator envelope, a close-up monitor, a sample counter and a small standing table.
Shown: ANAJ Czech, a.s., a Purple inline booth
See 10×20 rental booths →
Two demo stations, a cutting table or automation cell with clear sightlines, a sample library by application and an open meeting area under a hanging sign.
Shown: Gotec, a Purple island exhibit
See 20×20 rental booths →
A full production sequence from pattern to finished piece, several machines with power and air, a theater for scheduled demos and a closed meeting room.
Shown: Han Song, a Purple island exhibit
See 20×30 rental booths →In Purple's price
- Design and a 3D rendering, revised until it is right
- Structure, printed graphics, counters and storage as specified
- Lighting and power distribution inside the booth
- Installation and dismantle, with our project manager on the floor
- Every show-service order and deadline tracked for you
Billed by the show and its contractor
- Booth space (paid to the organizer)
- Material handling / drayage
- Electrical service, internet and rigging
- Booth cleaning and any union labor the venue requires
We estimate every one of these on your proposal, so the total is on paper before you sign.
All-in 2026 ranges for design, structure, graphics, installation and dismantle. A custom-built booth runs roughly $100 to $250 per square foot depending on finish level. A rental of the same footprint usually lands at 35 to 50 percent of the purchase price for one show. Get an exact number for Texprocess Americas with the booth cost calculator or read the 2026 booth cost guide.
Send the show, your booth size and what the space needs to do. We reply within one business day and send a rendering and a fixed proposal, usually within a week. No charge.
03 Built by Purple
Booths we have designed, built and installed
Case study · KLEEMANN
KLEEMANN at industrial technology exhibition
An interactive booth for a global elevator manufacturer: digital simulations, real product showcases and a floor plan that guided visitors from first step to last.
Read the KLEEMANN case study All case studies →“Purple Exhibits made us look good. The booth was one of the nicest displays in our section of the convention center and generated a lot of positive comments from both customers and industry peers. Their attention to detail, professionalism, and willingness to go above and beyond made a huge difference.”
Kimberly Owens, Brand Manager, Owens Products · more client reviews
Trusted by exhibitors including
04 Designing for sewn-product machinery, cutting and software at Texprocess Americas
Four things we get right for Texprocess Americas exhibitors
1Design for the operator first
A machine needs more than its footprint: an operator position, material supply, a place for finished pieces and access for the technician. We take those dimensions from your equipment team before we draw the visitor edge, so the demo runs in comfort instead of the leftover space.
2Put the small action on screen
A seam, a cut or a fastener is hard to see from the aisle. We mount a camera on the working area and feed a monitor at eye height, aligned with the machine, so visitors follow the detail while the operator keeps room to handle the material properly.
Give the output a destination
Every demo ends with a piece someone can pick up. We build an inspection surface beside the machine, organize samples by application, apparel, upholstery, automotive, and hide replenishment stock inside the furniture so the comparison area never becomes a supply shelf.
Software needs a physical anchor
CAD, virtual prototyping and cutting-room software land better next to the pattern, cut part or garment they produced. We build shared-view workstations with a prepared project, keep interface content legible from standing height and skip the autoplay reel.
Concept rendering
Every proposal comes with a rendering like this
You see the booth in 3D before we cut a single panel: layout, graphics, lighting and product positions, revised until it is right. Shown: a Purple concept for Unic.
Start my Texprocess Americas concept05 Georgia World Congress Center · Atlanta
Logistics for Texprocess Americas 2027, handled
Georgia is a right-to-work state, so your own full-time staff can work alongside our crew on assembly, while drayage, power and compressed air route through Shepard as the official contractor. The Georgia World Congress Center runs three connected buildings, A, B and C, with different dock and freight-elevator access, and our planning rate for drayage is about $150 per hundredweight with a 200-pound minimum. We file the exhibitor-appointed contractor notice and insurance certificate, book your Shepard targets, ship to the advance warehouse, arrange pallet jacks and lift equipment for the machinery, and put our on-site team on the floor. Hotels along International Boulevard are a short walk, and MARTA stops at the campus door.
Hall rules, drayage estimates and freight deadlines for this building are in our Georgia World Congress Center exhibitor guide.
What Purple handles
- Exhibitor kit, Shepard orders and target dates
- Exhibitor-appointed contractor notice and insurance certificate
- Power, compressed air and lift equipment for the machinery
- Graphics printed in house and proofed against your samples
- Freight to the advance warehouse and drayage paperwork
- Installation, dismantle and return shipping with our on-site team
Timeline, counted back from move-in
- By March 1, 2027Design sign-off with machine envelopes, power and air requirements locked; island drawings submitted where required.
- March 2027Production in our shop; graphics proofed against your samples and machine finishes.
- Mid-April 2027Booth and demo furniture ship to the Shepard advance warehouse in Atlanta; your machinery freight is scheduled to the same target.
- May 8–10, 2027Targeted move-in; our on-site team installs, connects services and runs the pre-show demo check.
- May 11–13, 2027Show days; a Purple project manager is on call for the whole run.
- May 13–14, 2027Dismantle, machines crated to your return plan, booth to storage or the next show.
Texprocess Americas exhibitor questions
Questions exhibitors ask us before Texprocess Americas
How much does a 20×20 at Texprocess Americas cost?
A 20×20 custom island lands between $50,000 and $120,000 all in for design, structure, graphics and installation, and a 20×20 rental island between $16,000 and $40,000. A 10×20 inline runs $7,500 to $15,000 as a rental. Machine power, air and a camera-to-screen demo move the number; send your machine list and we return a fixed quote.
Can you install at the Georgia World Congress Center?
Yes. Our on-site team installs at the GWCC and knows the dock differences between Buildings A, B and C. Georgia is a right-to-work state, so your own technicians can set the machines beside our installers while Shepard handles drayage and utilities. We arrange the pallet jacks and lift equipment your cutting tables and sewing systems need.
Can we rent a booth for Texprocess Americas?
Yes. Rental structures with your graphics, custom demo counters and a hybrid of the two are all available. Most first-time Texprocess exhibitors start with a 10×20 rental built around one running machine and a sample counter, then upgrade the feature wall the next edition.
When do we need to decide?
Design sign-off by March 1 gives a comfortable 30 to 45-day build and a mid-April ship date to the Shepard advance warehouse. Later is possible; the trade-off is choice of finishes and freight cost, and machine power and air orders get more expensive after the early deadline.
Do you handle Shepard orders and drayage?
Yes. We read the exhibitor kit, order Shepard material handling, power and compressed air, file the exhibitor-appointed contractor paperwork and keep you copied on every deadline. Your machinery ships to the same target date as the booth so nothing sits on the dock.
Before you sign with anyone
Five questions to ask any exhibit builder for Texprocess Americas:
- Is every fee on the proposal, including what the show contractor bills?
- Who builds the booth: your own shop or a subcontractor?
- Will your project manager be on the floor for install and dismantle?
- What exactly is in the rental, and what is billed by the show?
- Where does the booth go after the show, and what does storage cost?
Common situations
Already own a booth? We refresh the graphics, repair what is worn, ship it, install it and store it between shows. You keep the structure you paid for.
Exhibiting from outside the US? We are your team on the ground: freight to the advance warehouse, show-service orders, installation and storage, with one project manager answering your emails in your time zone.
Short on time? A rental with your graphics can be ready in two to three weeks. We tell you on the first call what is realistic for your date.
Get a proposal
Tell us about your Texprocess Americas booth
What happens next
- We reply within one business day with questions about your products, goals and footprint.
- You get a concept rendering and a fixed proposal, usually within a week. Every last fee listed upfront, in full, on paper.
- We build in 30–45 days, ship to the advance warehouse and install before the hall opens.