NABCEP CE Conference 2027Mobile booth costs, dates and deadlines: exhibitor guide
Installers earning CE hours: NABCEP CE 2027 booths built for Mobile
- Event dates
- March 15–18, 2027
- Exhibit hall
- Not confirmed yet
- Venue
- Arthur R. Outlaw Mobile Convention Center, Mobile
4.9 client ratingSince 201510,000+ booths built3,000+ exhibitors



Quick answers
NABCEP CE Conference 2027 in 30 seconds
The short version for NABCEP CE Conference exhibitors. Every figure has its source further down the page.
- When is NABCEP CE Conference 2027?
- March 15–18, 2027, at Arthur R. Outlaw Mobile Convention Center, Mobile.
- When is the hall open at NABCEP CE Conference?
- Not confirmed yet for 2027.
- How big is NABCEP CE Conference?
- 450+ attendees, 52 exhibitors (2017 edition).
- What does a 10×20 booth cost all-in?
- $7,500 – $15,000 for a Purple rental at NABCEP CE Conference with design, graphics, lighting, install and dismantle. Space and show services are billed by NABCEP CE Conference.
- For NABCEP CE Conference, what is the next exhibitor deadline?
- Walt Ratterman Award nominations close: December 1, 2026.
Official NABCEP CE Conference 2027 links: NABCEP CE Conference 2027 registrationNABCEP CE Conference 2027 booth space
Everything about NABCEP CE Conference 2027 in one place
NABCEP CE Conference 2027 fact sheet
| Official name | NABCEP Continuing Education (CE) Conference 2027 |
|---|---|
| Event dates | March 15–18, 2027 |
| Exhibit hall dates | Not confirmed yet |
| Venue | Arthur R. Outlaw Mobile Convention Center 1 South Water Street, Mobile, AL 36602 |
| Organizer | North American Board of Certified Energy Practitioners (NABCEP) |
| Size (2017) | 450+ attendees · 52 exhibitors source |
| Who attends | NABCEP Board Certified Professionals, PV Associates, instructors and trainers, distributors and manufacturer training staff |
| Next deadline | Walt Ratterman Award nominations close: December 1, 2026 source |
| Hotels | NABCEP's conference hotel block; 2027 details not confirmed yet |
| Official website | nabcep.org |
Official NABCEP CE Conference resources
NABCEP CE Conference 2027 calendar
NABCEP CE Conference 2027 dates and deadlines
These are the dates the organizer has published for NABCEP CE Conference, listed in order and linked to the pages that state them. The next one is highlighted.
01 Purple at NABCEP CE Conference 2027
Installers earning CE hours: NABCEP CE 2027 booths built for Mobile
Your booth here teaches as much as it sells: certified installers and PV designers come to earn CE hours, then handle the inverter, rail or battery they will specify next season. In Mobile we build for a Monday noon-to-6 set-up and a Thursday 1 p.m. tear-down.
- Mar 15–18 · Mobile, AL
- Up to 24 CE hours
- Set-up Mon noon–6 p.m.
What makes NABCEP CE Conference different, and how we build for it
The North American Board of Certified Energy Practitioners runs the only industry event where Board Certified Professionals can earn up to 24 CE hours toward recertification, so the room is full of people who install, design, inspect and maintain PV and storage for a living. Content is advanced level. Monday brings pre-conference sessions, Ignite Sessions, a Meet n Greet, the keynote and the opening reception; Tuesday and Wednesday run technical sessions all day, 9 a.m. until 6 p.m., with lunches and dinners on site. The Walt Ratterman Award is presented here, and the Scanifly FAA Part 107 drone course returns for 2027 in Mobile, a first for Alabama.
They hold NABCEP PV Installation, Design or Technical Sales credentials and need CE hours; between sessions they look closely at wiring, mounting details, rapid shutdown and commissioning steps they will use on the next job.
Trainers who run installer programs want hardware they can teach with, spec sheets and training materials, and a manufacturer contact who will support a class.
Distributor staff and newer PV Associates earning 12 CE units compare product lines and want to know what is in stock, what installers ask for and how warranty claims work.
Your team in Mobile
Two shops and one project manager for NABCEP CE Conference
Your NABCEP CE Conference booth is built in our own production shop in Fishkill, NY, or at our Las Vegas hub, shipped to the Arthur R. Outlaw Mobile Convention Center and installed by vetted local labor with our own project manager on the floor. A predictable 30–45-day turnaround, secure storage and a pre-show QA before NABCEP CE Conference.
Your staff walks onto the NABCEP CE Conference floor and the booth is already lit and stocked. You just show up.
New at NABCEP CE Conference 2027
- First NABCEP conference in Alabama
NABCEP moves the 2027 conference to Mobile, its first in Alabama, after Reno in 2025. For exhibitors it means a compact waterfront building with parking linked by skywalk, and freight routed to the Gulf Coast rather than a large Western hall. source
Inside NABCEP CE Conference 2027
Rules that shape your booth
NABCEP's preliminary 2027 schedule gives exhibitors Monday, March 15 from noon to 6 p.m. to set up, ending as the keynote begins. We pre-assemble frames and pre-wire every display in Fishkill so the booth goes up in that single window.
Exhibitor tear-down runs Thursday, March 18 from 1 to 6 p.m., while technical sessions continue until 4:30. We pack to labeled crates on a short checklist so staff can still attend afternoon sessions.
NABCEP sells exhibits and sponsorship tiers, Platinum through Bronze, through its conference planner and an Exhibitor Kit linked from the Cvent event page. We size the design to the space the kit assigns rather than a footprint the floor may not offer.
Programs worth planning for
Honors the NABCEP Board Certified Professional with the year's most creative public service renewable energy project; presented in Mobile, with $500 to the winner's charity. Nominations close December 1, 2026.
Scanifly's FAA Part 107 drone class returns for 2027 alongside the conference, with its own separate registration; NABCEP lists registration details as coming soon.
Monday, March 15 from 2:30 to 4:30 p.m., after the pre-conference sessions and before the Meet n Greet and keynote, on the same day exhibitors set up.
Platinum, Diamond, Ruby, Emerald, Gold, Silver and Bronze tiers plus Preferred Partners and media sponsors; each sponsor is recognized on NABCEP's website for a full year and receives a custom sponsor logo.
NABCEP CE is the installer-training event of U.S. solar, small and hands-on; choose it over RE+ when your buyer is the certified installer or designer who picks the hardware, not the developer or distributor buying by the container. Compare all the energy and utilities shows we build for →
Sponsors of NABCEP CE Conference 2027
Sponsors listed for the NABCEP CE Conference 2027. See the full list
- BayWa r.e.
- Scanifly
- SolarInsure
- EnergySage
- Rolls Battery
- Megger
- SMA
- Greentech Renewables
- Sungrow
- Briggs & Stratton
- Pytes
- Sol-Ark
- Aurora Solar
- Megarevo
- FranklinWH
- Fluke
- CPS America
- SPAN
- Pegasus Solar
- Unirac
energy and utilities at NABCEP CE Conference
The industry behind NABCEP CE Conference, in pictures




02 Booths & pricing for NABCEP CE Conference 2027
Popular booth sizes at NABCEP CE Conference
NABCEP sells exhibit space and sponsorships through its Exhibitor Kit, and 2027 booth sizes and prices are not confirmed yet. We recommend a compact 10×20 training booth when the floor plan offers one, and counters, graphics and product stands sized to whatever footprint the kit assigns.

An inverter, racking or storage brand: a mock roof section with rails and clamps installers can torque, a live inverter display and a counter for spec sheets.
Shown: a Purple inline booth for Wisepower Enterprise
See 10×20 rental booths →
A distributor or multi-line maker: three short teaching stations, modules, power electronics and storage, so trainers can walk a full system from roof to battery.
Above: Tesla Transformers (India) Ltd., a Purple inline booth
See 10×30 rental booths →
A sponsor-level space, where NABCEP offers one: a hands-on wiring bench, seating for six for short product trainings between sessions and a lit back wall.
Above: Highend Collections, a Purple island exhibit
See 20×20 rental booths →
Larger than this education floor usually calls for; the same kit grows into a full booth for RE+ in Las Vegas or Intersolar in San Diego.
Above: FGX, a Purple island exhibit
See 20×30 rental booths →In Purple's NABCEP CE Conference price
- Design and a 3D rendering for NABCEP CE Conference, revised until it is right
- The structure, printed graphics, counters and storage your NABCEP CE Conference plan specifies
- Booth lighting, with power distributed inside the booth
- Installation and dismantle in Mobile, run by our project manager on the floor
- Show-service orders and deadlines for NABCEP CE Conference, tracked on your behalf
Billed by NABCEP CE Conference and its contractor
- Exhibit space (paid to North American Board of Certified Energy Practitioners)
- Material handling (drayage) at the Arthur R. Outlaw Mobile Convention Center, where the space rate does not include it
- Electrical, internet and rigging orders for NABCEP CE Conference
- Booth cleaning and any union labor the Arthur R. Outlaw Mobile Convention Center requires
Before you sign, your proposal already estimates each of these show charges, so the NABCEP CE Conference total is on paper.
All-in 2026 rental ranges: design, structure, graphics, installation and dismantle are included, and custom NABCEP CE Conference builds are quoted per project. Get an exact number for NABCEP CE Conference with the booth cost calculator or the 2026 booth cost guide.
Send your NABCEP CE Conference booth size and what the space needs to do for your team. A reply within one business day, then a NABCEP CE Conference rendering and fixed proposal, usually within a week. No charge.
In Mobile, your team walks into a booth that is already lit and stocked. You just show up.
03 Built by Purple
Built by our team: booths to compare for NABCEP CE Conference




Case study · KLEEMANN
KLEEMANN at an industrial technology exhibition
An interactive booth for a global elevator manufacturer, combining digital simulations and real product showcases on a floor plan that led visitors from first step to last.
KLEEMANN's booth let visitors handle real products and follow simulations step by step; installers at NABCEP CE judge solar hardware the same way, by mounting and wiring it themselves.
Read the KLEEMANN case study All case studies →“They handle everything end to end so clients can really just show up and not worry about anything. Doesn’t get any better than that.”
Tess Bockes, Exit King Realty · what other clients say
Trusted by exhibitors including
04 Designing for solar module, inverter, racking, storage, safety, tool and design-software makers that train installers at NABCEP CE Conference
Four things we get right for NABCEP CE Conference exhibitors
1Build a roof section, not a poster
NABCEP attendees are certified installers who judge a product by how it mounts. We build a pitched roof mock-up with real rafters, flashing and rail so your clamp, attachment or microinverter can be installed in front of them, the way they would on a job.
2Teach in the gaps between sessions
Tuesday and Wednesday sessions fill the 9-to-6 day, so traffic comes in bursts at breakfast, the two-hour lunch and breaks. We add a short seated demo corner so your trainer can run a ten-minute walk-through for a group the moment a session lets out.
3Thursday tear-down starts at 1
NABCEP sets exhibitor tear-down for Thursday, March 18 from 1 to 6 p.m., while technical sessions continue until 4:30. We design a booth that packs in under two hours with labeled crates, so your staff can still attend afternoon sessions for CE credit.
4One afternoon to set up
Exhibitor set-up runs Monday, March 15 from noon to 6 p.m., before the 6 p.m. keynote and the opening reception. We pre-wire product displays and pre-assemble frames in Fishkill so the whole booth goes up in a single Mobile afternoon.

Concept rendering
Your proposal for NABCEP CE Conference includes a rendering like this one
See the NABCEP CE Conference booth in 3D first: layout, graphics, lighting and where products sit, revised until it is right and before any panel is cut. Shown: a Purple concept for Waaree Solar Americas.
Start my NABCEP CE Conference conceptFloor at a glance
Where you could be at NABCEP CE Conference 2027
NABCEP has not published which rooms the 2027 exhibits use. These are the spaces the Mobile Convention Center offers, per Visit Mobile, and what each means for an exhibitor.
Exhibit Hall Level
Two exhibit halls of 50,000 sq ft each, plus six meeting rooms on the same level.
Our advice A conference this size fits inside one hall, so aisles stay short and every booth is close to the food and break areas.
Concourse Level
Two ballrooms of 7,750 sq ft each and ten meeting rooms on the floor above the halls.
Our advice When sessions sit upstairs from the exhibits, signage on the route between levels helps draw installers down between talks.
Parking Level and skywalk
286 spaces on the building's own Parking Level and 1,550 more connected by skywalk.
Our advice Hand-carry samples can come by car to the Parking Level; crated freight still goes through the kit's receiving schedule.
05 Arthur R. Outlaw Mobile Convention Center · Mobile
Logistics for NABCEP CE Conference 2027, handled
The Arthur R. Outlaw Mobile Convention Center sits on the downtown waterfront at 1 South Water Street, with two 50,000 sq ft exhibit halls on its Exhibit Hall Level and two 7,750 sq ft ballrooms on the Concourse Level, per Visit Mobile. Parking includes 286 spaces on the building's own Parking Level and 1,550 more linked by skywalk, which helps a team unloading samples by car. With only Monday afternoon for set-up, we ship freight to arrive on the kit's receiving dates, file the Exhibitor Kit forms, and send our project manager to install with vetted local labor.
What Purple handles
- Pitched roof mock-ups with real rail and flashing
- Pre-wired inverter and battery displays
- A booth built for one afternoon of set-up
- Exhibitor Kit forms and freight to Mobile
- Fast Thursday pack-out with labeled crates
- Storage and reuse for RE+ and Intersolar

NABCEP CE Conference timeline, counted back from move-in
Exhibitor set-up window, noon to 6 p.m. only: March 15, 2027. The whole booth must go up in one Monday afternoon, so we need design sign-off by early January to pre-build and pre-wire everything in Fishkill.
Design sign-off for NABCEP CE Conference is due by early January 2027.
- November 2026Request the Exhibitor Kit from NABCEP; send us your product list and which hardware installers should touch.
- Early January 2027Design sign-off, about 10 weeks before set-up: roof mock-up, demo bench and graphics approved.
- January to mid-February 2027Production in Fishkill, NY over 30 to 45 days, with displays pre-wired and frames pre-assembled for a one-afternoon install.
- Late February to early March 2027Freight ships to Mobile on the kit's receiving schedule; electrical and other service forms filed.
- March 15, 2027, noon to 6 p.m.Exhibitor set-up at the Mobile Convention Center with our project manager, before the keynote and opening reception.
- March 16–18, 2027Technical sessions and exhibits; tear-down Thursday from 1 to 6 p.m., then return freight and storage.
Purple's planning timeline for NABCEP CE Conference. We confirm the official move-in, freight target and order deadlines for the Arthur R. Outlaw Mobile Convention Center against your booth when you book; they come from your exhibitor kit and assigned schedule.
Print the NABCEP CE Conference budget & deadline sheetTravel to NABCEP CE Conference 2027
Getting to NABCEP CE Conference 2027: hotels and parking
Stay
NABCEP's conference hotel block; 2027 details not confirmed yet
Park
286 spaces on the Parking Level plus 1,550 linked by skywalk, per Visit Mobile
Find the venue
Arthur R. Outlaw Mobile Convention Center
1 South Water Street, Mobile, AL 36602
Travel facts from mobile.org.
NABCEP CE Conference by the numbers
NABCEP CE Conference year by year
How NABCEP CE Conference 2027 compares with other energy and utilities shows
The energy and utilities shows closest to NABCEP CE Conference on the calendar, with the latest size each organizer has published. Each show name opens our energy and utilities exhibitor guide for that show.
| Show | Dates | City | Latest published size |
|---|---|---|---|
| EV Charging Summit & ExpoTerrapinn | March 1–3, 2027 | Las Vegas, NV | 1,500 delegates attendees · 70 sponsors exhibitors (2023) |
| DTECHClarion Events | March 1–4, 2027 | Atlanta, GA | 18,000+ attendees · 684 exhibitors (2026) |
| APECAPEC | March 7–11, 2027 | New Orleans, LA | – |
| WM SymposiaWM Symposia | March 7–11, 2027 | Phoenix, AZ | – |
| PowerTestNETA | March 8–12, 2027 | Orlando, FL | 103 exhibitors (2026) |
| International Battery SeminarCambridge EnerTech | March 15–18, 2027 | Orlando, FL | 2,000+ attendees · 150+ sponsors and exhibitors (2026) |
| NABCEP CE ConferenceNorth American Board of Certified Energy Practitioners (NABCEP) | March 15–18, 2027 | Mobile, AL | 450+ attendees · 52 exhibitors (2017) |
| NASTT No-Dig ShowNorth American Society for Trenchless Technology (NASTT) | March 21–25, 2027 | Raleigh, NC | – |
| IEEE ESWIEEE Industry Applications Society Electrical Safety Committee (ESafeC) | March 22–26, 2027 | Reno, NV | 719 attendees (2026) |
| RE+ TexasRE+ Events (Solar Energy Trade Shows) | March 24–25, 2027 | Houston, TX | 1,500 attendees · 115+ exhibitors (2026) |
NABCEP CE Conference exhibitor questions
Questions exhibitors ask us before NABCEP CE Conference
When is the NABCEP CE Conference 2027?
The 2027 conference runs Monday, March 15 through Thursday, March 18, 2027. Monday holds pre-conference sessions, Ignite Sessions, the keynote at 6 p.m. and the opening reception; Tuesday and Wednesday sessions start at 9 a.m. and close at 6 p.m., and Thursday runs from 8:30 a.m. to 4:30 p.m.
Where is NABCEP CE 2027 held?
NABCEP brings the 2027 conference to the Arthur R. Outlaw Mobile Convention Center, 1 South Water Street, Mobile, Alabama, its first conference in the state. The building sits on the Mobile River in downtown Mobile, the Port City NABCEP calls the birthplace of Mardi Gras.
When do exhibitors set up and tear down at NABCEP CE 2027?
Exhibitor set-up is Monday, March 15 from noon to 6 p.m., and tear-down is Thursday, March 18 from 1 to 6 p.m., per NABCEP's preliminary schedule. Exhibit hall open hours for 2027 are not confirmed yet; we plan the build around those two windows.
How much does it cost to exhibit at the NABCEP CE Conference?
NABCEP booth and sponsorship rates for 2027 are not confirmed yet; they come in the Exhibitor Kit linked from the Cvent event page. On our side, a Purple 10×20 rental with a roof mock-up typically runs $7,500 to $15,000, and graphics and counters sized to a smaller assigned space cost less.
How many CE hours can attendees earn at NABCEP CE?
Board Certified Professionals can earn up to 24 CE hours toward recertification, PV Associates can earn the 12 CE units they need to renew, and noncertified professionals can earn up to 18 hours toward Board Certification, per NABCEP's 2027 event page.
Who attends the NABCEP CE Conference?
NABCEP lists Board Certified Professionals, Associate Credential holders, instructors and trainers, subject matter experts and committee members, plus manufacturers of inverters, mounting, batteries and storage, panels, safety gear and software, and distributor suppliers. Content is aimed at experienced PV and storage professionals.
How many people attend NABCEP CE?
Attendance for NABCEP CE 2027 is not confirmed yet. NABCEP's own recaps counted over 450 solar professionals and 52 exhibitors at the 2017 conference in Dallas, and over 400 attendees with 39 exhibitors in Albany in 2015; in 2019 NABCEP said San Diego booths were almost sold out.
Which companies sponsor NABCEP CE 2027?
NABCEP lists BayWa r.e. as Platinum sponsor, Scanifly, SolarInsure and EnergySage as Preferred Partners, and Diamond sponsors including Rolls Battery, Megger, SMA and Greentech Renewables, with Sungrow, Sol-Ark, FranklinWH, Fluke, Unirac and others in lower tiers. Sponsors are recognized on NABCEP's website for a full year.
How do we get exhibit space at NABCEP CE?
Exhibit space and sponsorships go through NABCEP's conference planner and the Exhibitor Kit linked from the Cvent event page. In 2019 NABCEP reported exhibition booths almost sold out, so we suggest requesting the kit in November and holding a spot before designing anything larger than a counter.
Can we rent a booth for NABCEP CE?
We rent modular frames with printed fabric, counters, lighting and product stands sized to the footprint NABCEP assigns, and add custom pieces such as a roof mock-up or wiring bench. The rental ships from Fishkill, NY, and our project manager installs it during Monday's set-up window.
Is there an award at NABCEP CE?
NABCEP presents the Walt Ratterman Award at the 2027 conference in Mobile, honoring the Board Certified Professional with the most creative public service renewable energy project of the year; NABCEP donates $500 to the winner's charity. Nominations close Tuesday, December 1, 2026.
What else runs alongside the conference?
The Scanifly FAA Part 107 drone course returns for 2027 with separate registration, and Monday adds pre-conference sessions from 10:30 a.m. to 2 p.m., Ignite Sessions from 2:30 to 4:30 p.m. and a Meet n Greet before the keynote. Lunches and Tuesday and Wednesday dinners keep attendees in the building.
Is NABCEP CE worth exhibiting at?
For makers whose product an installer chooses on the roof, it puts certified installers, designers and trainers in a small room for four days, which a large hall show cannot. Brands chasing developers or utility buyers do better at RE+ or Intersolar & Energy Storage North America.
Before you sign for NABCEP CE Conference
Ask any NABCEP CE Conference exhibit builder these five questions:
- Is every fee on the proposal, including what the NABCEP CE Conference show contractor bills?
- Who actually builds it for NABCEP CE Conference: your shop or a subcontractor?
- Does your project manager stay on the floor through install and dismantle in Mobile?
- For NABCEP CE Conference, what is in the rental and what is billed by the show?
- Once NABCEP CE Conference closes, where does the booth go and what does storage cost?
Common situations
Already own a booth? We refresh the graphics, repair what is worn, ship it to the Arthur R. Outlaw Mobile Convention Center, install it and store it between shows. You keep using the structure you already paid for.
Exhibiting from outside the US? For NABCEP CE Conference, we act as your team on the ground: freight to the advance warehouse, show-service orders, installation and storage, and one project manager who answers your emails in your time zone.
Short on time? With a rental, your graphics can be ready in two to three weeks. You will know on the first call what is realistic for your NABCEP CE Conference date.
Get a proposal
Tell us about your NABCEP CE Conference booth
What happens next
- We reply within one business day with questions about your products, goals and footprint.
- Your NABCEP CE Conference concept rendering and fixed proposal usually arrive within a week. Each NABCEP CE Conference fee listed upfront and in full, on paper.
- Production runs 30–45 days, then we ship to the advance warehouse and install before the NABCEP CE Conference hall opens.