Thermal Management Expo 2027 · April 19–21, 2027 · Huntington Convention Center of Cleveland, Cleveland
Thermal Management Expo 2027 booth design & build in Cleveland
Custom and rental exhibits for thermal materials, cooling components and test services, built so an engineer can pick up the sample and follow the heat path. Cutaway fixtures, glare-free lighting for metal and film samples, and Cleveland freight and installation handled by Purple.
- April 19–21, 2027
- Huntington Convention Center of Cleveland
Every last fee listed upfront, in full, on paper. 3,000+ exhibitors · 10,000+ booths built · 4.9★ client rating · Since 2015
Heat exchanger cutaway at a 2010 construction and shipping industry exhibition
01 Purple at Thermal Management Expo 2027
What makes Thermal Management Expo different, and how we build for it
Thermal Management Expo North America shares Hall A & B of the Huntington Convention Center of Cleveland with Ceramics Expo, and one registration opens both floors, so a heat-sink or interface-material booth gets ceramics and advanced-materials buyers walking past as well as its own crowd. The conference program runs across aerospace, vehicle batteries, data centers, semiconductors and power electronics, and the Exhibitor & VIP Networking Reception on April 19 puts exhibitors in front of the speakers and VIP buyers the evening before the doors open. Two exhibit days is a short window. A booth that explains one application from the aisle and proves it with a sample up close earns the meeting.
The sample beside a sectioned assembly that shows where it sits and what it does, with a labeled handling piece and comparison data close at hand.
A simple source-to-destination heat-path diagram with your component highlighted, paired with a physical section or model so the boundaries of the claim are clear.
The engineering question, the input conditions and the result side by side, with a nearby screen for a deeper look while the main display stays readable to everyone else.
Your team in Cleveland
Two shops, one project manager, every hall
We build in our own production shop in Fishkill, NY and our Las Vegas hub, ship to the Huntington Convention Center of Cleveland, and install with our own project manager on the floor and vetted local labor. Predictable 30–45-day turnarounds, secure storage and pre-show QA.
Your team lands to a lit, stocked booth. You just show up.
02 Booths & pricing for Thermal Management Expo 2027
Pick a footprint. We price it as a rental, a custom build, or a hybrid.
The floor is mostly inline space with a smaller set of islands from the larger materials and cooling suppliers, so a 10×10 with one clear application graphic reads well. Purple clients at thermal and electronics shows usually choose a 10×20 with a sample counter or a 20×20 island with a cutaway and a meeting table.
One application graphic, a sample counter with labeled interface materials or heat sinks, and a stool for the first conversation.
Shown: Seain Industry Co., Ltd, a Purple inline booth
See 10×10 rental booths →
A sectioned assembly or cutaway on one side, a sample library arranged by application on the other, with a small table for engineering questions.
Shown: Rahman Group, a Purple inline booth
See 10×20 rental booths →
An island with a cutaway hero piece, a screen for simulation or test results, a working sample studio and an open meeting table under a hanging sign.
Shown: Tesla Transformers (India) Ltd., a Purple island exhibit
See 20×20 rental booths →
Several application stations sharing one explanatory sequence, a powered cooling demonstration, a closed meeting room and storage for handling samples.
Shown: SMOXH, a Purple island exhibit
See 20×30 rental booths →In Purple's price
- Design and a 3D rendering, revised until it is right
- Structure, printed graphics, counters and storage as specified
- Lighting and power distribution inside the booth
- Installation and dismantle, with our project manager on the floor
- Every show-service order and deadline tracked for you
Billed by the show and its contractor
- Booth space (paid to the organizer)
- Material handling / drayage
- Electrical service, internet and rigging
- Booth cleaning and any union labor the venue requires
We estimate every one of these on your proposal, so the total is on paper before you sign.
All-in 2026 ranges for design, structure, graphics, installation and dismantle. A custom-built booth runs roughly $100 to $250 per square foot depending on finish level. A rental of the same footprint usually lands at 35 to 50 percent of the purchase price for one show. Get an exact number for Thermal Management Expo with the booth cost calculator or read the 2026 booth cost guide.
Send the show, your booth size and what the space needs to do. We reply within one business day and send a rendering and a fixed proposal, usually within a week. No charge.
03 Built by Purple
Booths we have designed, built and installed
Case study · KLEEMANN
KLEEMANN at industrial technology exhibition
An interactive booth for a global elevator manufacturer: digital simulations, real product showcases and a floor plan that guided visitors from first step to last.
Read the KLEEMANN case study All case studies →“They handle everything end to end so clients can really just show up and not worry about anything. Doesn’t get any better than that.”
Tess Bockes, Exit King Realty · more client reviews
Trusted by exhibitors including
04 Designing for thermal management and electronics cooling suppliers at Thermal Management Expo
Four things we get right for Thermal Management Expo exhibitors
1Show the heat path first
Open with the application, locate your material or component in a sectioned assembly, then present the evidence beside it. Visitors from three disciplines follow the same sequence, so we carry one set of labels across the model, the screen and the printed reference.
2Light samples without glare
Metal, ceramic and film samples hide their features under a badly angled fixture. We check your real pieces under the proposed lights from several visitor positions, adjust angle and intensity, and keep comparison samples under identical viewing conditions so a difference is real, not lighting.
Mount layers so they read
When placement is the point, a spaced or exploded representative section shows exactly where your interface material or cooling layer sits without an operating assembly in the booth. We label each layer and its role and have your engineers approve the geometry before fabrication.
Separate the demo from the story
A live thermal demonstration needs power, a stable setup and a presenter. We build the surrounding walls so they still explain the offer when the demo is paused, give the presenter a prepared result, and place a screen nearby for the deeper simulation or test discussion.
Concept rendering
Every proposal comes with a rendering like this
You see the booth in 3D before we cut a single panel: layout, graphics, lighting and product positions, revised until it is right. Shown: a Purple concept for Green Chemica.
Start my Thermal Management Expo concept05 Huntington Convention Center of Cleveland · Cleveland
Logistics for Thermal Management Expo 2027, handled
The Huntington Convention Center of Cleveland is a union building; Ohio has no right-to-work law, so booth labor and hand-carry rules follow the show contractor's tariff, and we staff accordingly. Our planning figure for drayage is about $145 per hundredweight with a 200-pound minimum, which we build into your quote. Hall A & B sits on the downtown campus at 1 St Clair Avenue NE, a short walk from the downtown hotels and the RTA Red Line, 20 to 25 minutes from Cleveland Hopkins. We read the exhibitor kit, order the contractor services, ship to the advance warehouse and have our on-site team installs before the April 19 reception.
Hall rules, drayage estimates and freight deadlines for this building are in our Huntington Convention Center of Cleveland exhibitor guide.
What Purple handles
- Exhibitor kit, contractor orders and target dates
- Cutaway and sample-fixture engineering
- Graphics printed in house and proofed against your samples
- Electrical and power for demos and screens
- Freight to the Cleveland advance warehouse and drayage paperwork
- Installation, dismantle and return shipping with our on-site team
Timeline, counted back from move-in
- Early February 2027Design sign-off; cutaway and sample-fixture geometry approved by your engineers.
- February–March 2027Production in Fishkill, NY; graphics proofed against your real samples.
- Late March 2027Booth, fixtures and sample cases ship to the Cleveland advance warehouse.
- By April 19, 2027our on-site team installs in Hall A & B and runs the pre-show checklist before the Exhibitor & VIP Networking Reception.
- April 20–21, 2027Exhibits and conference; a Purple project manager is on call for both days.
- After close, April 21, 2027Dismantle, samples packed to your return plan, booth to storage or the next show.
Thermal Management Expo exhibitor questions
Questions exhibitors ask us before Thermal Management Expo
How much does a 10×20 at Thermal Management Expo cost?
A complete 10×20 rental runs $7,500 to $15,000 and a custom 10×20 $15,000 to $45,000, covering design, structure, graphics and installation. A 20×20 custom island lands between $50,000 and $120,000. Sample fixtures, cutaways and a live demo move the number; send us your product list and we return a fixed quote.
Can you install at the Huntington Convention Center of Cleveland?
Yes. Our on-site team installs in Hall A & B, works within the union labor rules that apply in Ohio, and has the booth standing and inspected before the April 19 Exhibitor & VIP Networking Reception. A Purple project manager stays on call through both exhibit days and the dismantle.
Can we rent a booth for Thermal Management Expo?
Yes. Rental structures with your graphics, custom sample fixtures on a rental frame, or a fully custom build are all available. Many first-time exhibitors at this show take a 10×10 or 10×20 rental with a custom sample counter and cutaway, then reuse those pieces at their next electronics or battery show.
When do we need to decide?
Design sign-off in early February 2027 gives a 30 to 45-day build and a late-March ship to the advance warehouse. We can start later; the trade-off is choice of finishes, time for your engineers to approve the cutaway geometry, and higher freight cost for a direct-to-show delivery.
Do you handle the service contractor orders and drayage?
Yes. We read the exhibitor kit, file the booth forms, order electrical for demos and screens, book the material handling and ship on the target date. Drayage at the Huntington Convention Center is planned at about $145 per hundredweight with a 200-pound minimum, and we build it into your quote.
Before you sign with anyone
Five questions to ask any exhibit builder for Thermal Management Expo:
- Is every fee on the proposal, including what the show contractor bills?
- Who builds the booth: your own shop or a subcontractor?
- Will your project manager be on the floor for install and dismantle?
- What exactly is in the rental, and what is billed by the show?
- Where does the booth go after the show, and what does storage cost?
Common situations
Already own a booth? We refresh the graphics, repair what is worn, ship it, install it and store it between shows. You keep the structure you paid for.
Exhibiting from outside the US? We are your team on the ground: freight to the advance warehouse, show-service orders, installation and storage, with one project manager answering your emails in your time zone.
Short on time? A rental with your graphics can be ready in two to three weeks. We tell you on the first call what is realistic for your date.
Get a proposal
Tell us about your Thermal Management Expo booth
What happens next
- We reply within one business day with questions about your products, goals and footprint.
- You get a concept rendering and a fixed proposal, usually within a week. Every last fee listed upfront, in full, on paper.
- We build in 30–45 days, ship to the advance warehouse and install before the hall opens.
.jpg){kind=link}